Abstract:Combining CO2 and green hydrogen to produce methanol can simultaneously realize CO2 conversion and green hydrogen storage. Methanol can be used as a green low-carbon fuel or industrial platform product for large-scale application, which is of great significance to promote the further development of Carbon Capture, Utilization and Storage (CCUS) technology. Non-thermal plasma (NTP) can activate CO2 under mild conditions for hydrogenation reaction and obtain specific products such as methanol by combining with catalysts to tailor the reaction routes, but the underlying reaction mechanism is still unclear. Based on this, the reaction mechanism and process coupling laws of the NTP-enhanced CO2 hydrogenation with assistance of Cu/γ-Al2O3 for methanol production were investigated by combining hydrogenation experiments in a dielectric barrier discharge (DBD) reactor with continuously-pulsed discharge plasma simulations. The experiments investigation showed that 18.74% CO2 conversion and 36.28% CH3OH selectivity could be achieved by combining NTP and 10% Cu/γ-Al2O3 at 80 ℃ and 0.1 MPa. The on-line discharge parameters monitoring and in-situ emission spectroscopy (OES) showed that the localized discharge was enhanced by Cu/γ-Al2O3, which increased the average electron energy and density, thus promote the CO and H generation and their surface consumption reaction, resulting in the weakening of spectral intensity. Furthermore, the sensitivity and ROP analyses indicated that the active substances such as H and CO in NTP promoted methanol generation efficiently by alternating the corresponding L-H routes, which usually had higher energy barriers, via E-R reactions such as CO2(S)+H→COOH(S), CO+H(S)→HCO(S), CO(S)+H→HCO(S), and CH3O(S)+H→CH3OH(S). The reaction pathways analysis revealed that the formate (HCOO*) pathway was the main pathway for methanol generation on the Cu/γ-Al2O3 surface, where the reaction CH3O(S)+H(S)→CH3OH(S)+Cu(S) was the rate-limiting step. The generation of CO(S) via the CO2(S)→COOH(S)→CO(S) in the RWGS+CO hydrogenation pathway and its rapid desorption played a vital role in reducing CH3OH selectivity. Uncertainty analysis demonstrated that although increasing the CO2 adsorption rate could effectively improve its conversion, but would not increase CO selectivity when H(S) was insufficient. The optimal CO2 and H2 adsorption rate ratio was predicated to be γ(H2)/γ(CO2)=7～8. Improving CO(S) adsorption stability and enhancing H2 electron collisional dissociation to promote H generation could promote reactions of CO(S)→HCO(S) and CH3O(S)→CH3OH(S), thus facilitated a CO2 conversion of 27.4% and CH3OH selectivity of 51% synergistically.

Vacuum Promoted Methane Decomposition for Hydrogen Production with Carbon Separation: Parameter Optimization and Economic Assessment

Catalytic carbon dioxide hydrogenation to methane: A review of recent studies

A near-zero carbon emission methanol production through CO2 hydrogenation integrated with renewable hydrogen: Process analysis, modification and evaluation

Liquid-phase CO2 Hydrogenation to Methanol Synthesis: Solvent Screening, Process Design and Techno-Economic Evaluation

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Optimization of the Hydrogen Production Process Coupled with Membrane Separation and Steam Reforming from Coke Oven Gas Using the Response Surface Methodology

Hydrogen and carbon produced by fluidized bed catalytic methane decomposition

Mechanistic Exploration of Non-Thermal Plasma-Enhanced Cu-catalyzed CO2 Hydrogenation to Methanol

Absorption-Enhanced Methanol Steam Reforming for Low-Temperature Hydrogen Production with Carbon Capture

Study on a novel hydrogen purification approach base on methane steam reforming process with CO-preferential oxidation and CO 2 removal

Methane Decomposition with Some CO2 As Co-Feed: Co-production of Syngas and Carbon Fibers/microspheres by Using a Hybrid of K2CO3 and Coal Char

Hydrogen production and decarbonization with hydrogen absorption-enhanced methanol steam reforming

Production of hydrogen and value-added carbon materials by catalytic methane decomposition: a review

Methane decomposition to pure hydrogen and carbon nano materials: State-of-the-art and future perspectives

Sorption-enhanced Chemical Looping Oxidative Steam Reforming of Methanol for On-Board Hydrogen Supply

An improved vacuum pressure swing adsorption process with the simulated moving bed operation mode for CH4/N2 separation to produce high-purity methane

Multi-technique integration separation frameworks after steam reforming for coal-based hydrogen generation

Methane Simultaneous Recovery from CH4/N2 Stream and CH4/CO2 Stream by the Displacement VPSA Process

A near-zero carbon emission methanol production through CO 2 hydrogenation integrated with renewable hydrogen: Process analysis, modification and evaluation

Catalytic Hydrogen Production from Methane: A Review on Recent Progress and Prospect

Hydrogen Production by Catalytic Methane Decomposition: Carbon Materials As Catalysts or Catalyst Supports