Abstract:MgO expansive agent (MEA) has the potential to meet the shrinkage compensation demands for concrete in different types of structures due to its designable reactivity and expansion properties. This study investigated the impact of three types of MEAs with different reactivities as well as curing temperature on the autogenous deformation, mechanical properties, and the microstructure of cement-based materials. The results showed that MEA type R exhibits a faster and larger hydration degree and expansion in cement mortars than MEA type M or type S in early ages under 20 °C, while when the curing temperature increases to 40 °C and 60 °C, MEA type M and type S present with significant accelerations in the hydration degree, leading to accelerated expansion rates and significantly increased expansion values compared to MEA type R. Under 40 °C, 5% MEA type M and type S present with 2.2 times and 1.1 times higher expansion in mortars than 5% MEA type R, respectively, and 8% MEA type M and type S present with 7.1 times and 5.6 times higher expansion in mortars than 8% MEA type R, respectively. Under 60 °C, 5% MEA type M and type S present 4.0 times and 3.1 times higher expansion in mortars than 5% MEA type R, respectively, and 8% MEA type M and type S present 7.0 times and 6.6 times higher expansion in mortars than 8% MEA type R, respectively. However, the increase in porosity, especially for large pores with pore size greater than 50 nm as well as the microcracks induced by the 8% dosage of MEA type M, type S, and high curing temperature of 60 °C, result in a decrease in strength of about 30% for the cement mortars. The results indicate that MEA type R is more suitable for shrinkage compensation of cement-based materials with lower temperatures, while MEA type M and type S are more suitable for shrinkage compensation of cement-based materials with higher temperatures. Under high-temperature and low-constraint conditions, the dosage of MEA needs to be strictly controlled to prevent negative effects on the microstructure and strength of cement-based materials.

Properties and Mechanism of the Compound MgO Expansive Agent(cmea) Produced by Calcining the Mixture of Dolomite and Serpentine Tailings

Influence of Chemical Activity and Curing Temperature on Expansion Properties of Magnesium Oxide Expansive Agents

Effects of Reactivity of MgO Expansive Agent on Its Performance in Cement-Based Materials and an Improvement of the Evaluating Method of MEA Reactivity

Mechanism underlying effects of CaO-MgO combined expansive agent on hydration kinetics of cement-based systems

Hydration Characteristics and Expansive Mechanism of MgO Expansive Agents

Effects of MEA Type and Curing Temperature on the Autogenous Deformation, Mechanical Properties, and Microstructure of Cement-Based Materials

Influence of fineness of MgO expansive agent on expansion, mechanical strength, and microstructure of fly ash-Portland cement paste

Micro-Change Process of Calcium–Magnesium Double Expansive Agent and Its Performance Characterization in Cement-Based Materials

RESEARCH ON THE EXPANSI8VE MECHANISM OF MODERATE HEAT PORTLAND CEMENT WITH SLIGHT EXPANSION

Characterization of magnesium-calcium oxysulfate cement prepared by replacing MgSO4 in magnesium oxysulfate cement with untreated desulfurization gypsum

The Influence of the Hydration Procedure of MgO Expansive Agent on the Expansive Behavior of Shrinkage-Compensating Mortar

Expansion Mechanism and Properties of Magnesium Oxide Expansive Hydraulic Cement for Engineering Applications

Rheological, Deformation Behaviors and Mechanical Changes of Mgo-Containing Concretes with Different Strength

Preparation and properties of a magnesium phosphate cement with dolomite

MgO activated calcined marine clay and its carbonation

Preparation of Low-Cost Magnesium Oxychloride Cement Using Magnesium Residue Byproducts from the Production of Lithium Carbonate from Salt Lakes

EXPANSIVE PROPERTY AND PORE STRUCTURE CHARACTERISITICS OF MAGNESIUM OXIDE SLIGHT EXPANSIVE CEMENT- FLY ASH BINDING MATERIAL

Effect of MgO and superfine slag modification on the carbonation resistance of phosphogypsum-based cementitious materials: Based on hydration enhancement and phase evolution regulation

Mitigating shrinkage in ultra-high performance concrete using MgO expansion agents with different activity levels

Engineering properties and sustainability evaluation of crushed low grade magnesite mortars

Effects of reactive MgO on durability and microstructure of cement-based materials: Considering carbonation and pH value