Abstract:In order to investigate the vertical dynamic response characteristics of train-track-bridge system on CWR (Continunously Welded Rail) under dynamic load of train on HSR (High-Speed Railway) bridge. Based on the principle of vehicle train-track-bridge coupling dynamics, taking the 32m simply supported bridge of a section of Zhengzhou-Xuzhou Passenger Dedicated Line as an example, the finite element software ANSYS and the dynamic analysis software SIMPACK are used for co-simulation, and bridge model of the steel spring floating slab track and the CRTSIII ballastless track (China Railway Track System) considering the shock absorbing steel spring, the limit barricade and the contact characteristics of track structure layers are established. On this basis, in order to study the dynamic response laws of the design of ballastless track structure parameters to the system when the train crosses the bridge and provide the basis for the design and construction, by studying the influence of the speed of train on the bridge, the damage of fasteners and the parameters of track structure on the train-track-bridge system, the displacement of rail, vertical vibration acceleration and wheel-rail force response performance are analyzed. Studies have shown that: At the train speed of 40 km/h, the displacement and acceleration of the rail and track slab in the CRTSIII ballastless track are smaller than the floating slab track structure, but the floating slab track structure has better vibration reduction performance for bridges. The acceleration of rail, track slab and bridge increases obviously with the increase of train speed, the rail structure has the largest increasement. Reducing the stiffness of fasteners could decrease the vertical acceleration response of the steel spring floating slab track system, the ability to absorb shock can be enhanceed by reducing the stiffness of the fastener appropriately. Increasing the density of the floating slab can increase the vertical acceleration of the floating slab and the bridge, thereby decreasing the vibration amplitude of the system.

Study of Resonance Condition of Railway Bridge Subjected to Train Loads with a Four-Beam System

Dynamic Response Analysis of Multi-Span Bridge-Track Structure System under Moving Loads

Dynamic response analysis of a multiple-beam structure subjected to a moving load

General Conditions for the Resonance and Cancellation of Railway Bridges under Moving Train Loads

Experimental Study on the Dynamic Deformation of Simply Supported Beam in Chinese High-speed Railway

An Analytical Study on Dynamic Response of Multiple Simply Supported Beam System Subjected to Moving Loads

Dynamic Response of Railway Bridges under Heavy-Haul Freight Trains

Resonance of High-Speed Trains Moving over a Series of Simple or Continuous Beams with Non-Ballasted Tracks

Train–Bridge Coupled Vibration of a Long-Span Steel Truss Suspension Bridge Under Complex Driving Conditions

Vibration Analysis of Simple Supported Box Beam Induced by High Speed Train

Seismic Response Law of Suspension Bridge-Track System of High-Speed Railway

Resonance analysis of a high-speed railway bridge using a stochastic finite element method

DYNAMIC RESPONSE OF LONG CONTINUOUS RIGID-FRAMED BRIDGE SUBJUCTED TO TRAIN AND SEISMIC MULTI-SUPPORTS EXCITATIONS

Vibration Characteristic Analysis of High-Speed Railway Simply Supported Beam Bridge-Track Structure System

Condition assessment for high-speed railway bridges based on train-induced strain response

Vertical Dynamic Analysis of Ballastless Tracks on Train-Track- Bridge System

Effect of Track Spectrum on the Dynamic Responses of Passenger–Train–Bridge System

Response Analysis of Railway Bridge with High Piers due to Vehicle Braking

Research on Static and Dynamic Performances of Rigid Frame Tied-arch Bridge on Four-line Railway

Vertical Dynamic Responses Of A Simply Supported Bridge Subjected To A Moving Train With Two-Wheelset Vehicles Using Modal Analysis Method

Analytical Solution for Dynamic Response of a Reinforced Concrete Beam with Viscoelastic Bearings Subjected to Moving Loads