Abstract:Fractals, Ahead of Print. Finger seal is a new flexible dynamic sealing technology, and its heat transfer characteristics and seepage characteristics are one of the main research hotspots. In this paper, based on the fractal theory, a fractal model of the total thermal conductance of the finger seal considering the heat transfer effect of the contact gap of the rough surface is established, a fractal model of the effective gas permeability of the adjacent finger seals annulus considering the gas slip effect and the temperature change is established, and a finite element calculation method of the two-way thermo-mechanical coupling for the finger seal is proposed. The results show that the solid-phase thermal conductance decreases with the increase of the scale coefficient. When the axial pressure difference is greater than 0.4[math]MPa, the rotor speed is greater than 11,000[math]r/min, the radial displacement excitation is [0.03[math]mm, 0.09[math]mm], and the temperature is less than 600[math]K, the gas-phase thermal conductance between the finger seal and the rotor shows an increasing trend. The gas-phase thermal conductance of the finger seal and the rotor is always the main position under different working conditions. Under different fractal dimensions, the solid-phase thermal conductance gradually occupies the dominant position. Temperature has a certain effect on the effective gas permeability, and fractal dimension, scale coefficient, and axial pressure difference have less effect on the effective gas permeability. At an axial pressure difference of 0.08[math]MPa, the numerical calculation results of the two-way thermo-mechanical coupling calculation method for finger seal are closer to the experimental results, with a maximum error rate of 1.96%. The above results further improve the theoretical research system of the heat transfer characteristics of the finger seal.

Fractal analysis of the thermal contact conductance for mechanical interface

Thermo-mechanical Coupling Analysis of a High-Speed Actuating Mechanism Based on a New Thermal Contact Resistance Model

Fractal model of thermal contact conductance of two spherical joint surfaces considering friction coefficient

Rough contact surface reconstruction based on A mechanical-thermal contact model

Thermal contact conductance model of rough surfaces with inclination based on three-dimensional fractal theory

Normal Load of Internal Combustion Engine Junction Based on Fractal Theory of Thermal Elasto-Plastic Contact

Temperature Rise in Frictional Sliding Contact of Elastic–Plastic Solids with Fractal Surface

Fractal model of thermal contact conductance of the involute arc cylindrical gear considering friction coefficient

Fractal model of thermal contact conductance of rough surfaces based on elliptical asperity

Sliding State Analysis of Fractal Rough Interface Based on the Finite Element Method

Estimation of Real Contact Area During Sliding Friction from Interface Temperature

Tangential contact stiffness modeling between fractal rough surfaces with experimental validation

A thermal model in frictional contacts

Calculation of Temperature Fields of Bodies in Sliding Contact Without Lubrication

Frictional heat accumulation at cyclically rolling-sliding contacts with consideration to time-dependent contact pressure

Thermal performance of fractal meta-surface and its mathematical model

Atomistic insight into flash temperature during friction

Frictional Contacts Between Rough Grains With Fractal Morphology

Calculation of Temperature Field in Dry Sliding Contact at Different Speeds

Analytically decoupling of friction coefficient between mixed lubricated fractal surfaces

Research On Fractal Heat Flow Characterization Of Finger Seal Considering The Heat Transfer Effect Of Contact Gaps On Rough Surfaces