Abstract:Cohesive powders cannot flow freely in the silo and even behave like solid, which brings a great challenge to the powder handling process. Aeration is an effective method used to break the arch structure formed above the silo outlet and to promote the powder flow. However, it is difficult to determine the solid-liquid transition behaviors and to predict the critical arch-breaking gas flow rate in the aerated discharge systems. In this paper, cohesive powders including alumina (Al2O3), pulverized coal (COAL) and calcium carbonate (CaCO3) were used as experimental materials. Powder flow properties were characterized by conducting shear test, permeability test, and aerated discharge experiment. Unconfined yield strength of powders under zero pre-consolidated stress was obtained based on using a linear extrapolation procedure of shear parameters. Aerated discharge characteristics of cohesive powders were determined and, the critical condition corresponding to the transition from solid-like to liquid-state and the stable condition distinguishing the funnel flow pattern and mass flow pattern were defined, respectively. The Brown and Richards model, and the flow/no-flow criterion of Jenike were modified to describe the powder flow state and to predict the solid mass flow rate under the action of aeration by introducing the positive gas pressure gradient. A logical algorithm was proposed to predict the critical arch-breaking gas flow rate by assuming the same gas distribution coefficient under different aeration conditions. As a precondition, the critical solid mass flow rate was calculated by an iterative algorithm giving the same order of magnitude of that from the experiment, which was further related to the stable solid mass flow rate and the powder permeability index. This simplification provided us with satisfactory results for all the powders producing errors generally less than 30%, a more easy-to-operate method to determine the critical arch-breaking gas flow rate.

Investigation of Wet Coal Flow Characteristics in Silos by Experiments and Simulations

Multi-Scale Study of Particle Flow in Silos

Discharge and Mixing of Moisture Coal Particles in Silos

Effect of Different Moisture Content and Pressure on the Fluidity of Raw Coal

Effect of Moisture on Flowability of Pulverized Coal

Numerical Simulation of Mixing Capability in Coal-Slurry Mixing Tank

Study of the Flowability of Pulverized Coals

Study on dense-phase conveying experiments of pulverized coal with various external moisture contents at high pressure

Investigation of influence of coal properties on dense-phase pneumatic conveying at high pressure

Experimental Study on Fluidity of High Moisture Lignite

DEM modeling of the dilute-to-dense transition of granular flow in silos

Discrete Element Numerical Simulation of Fluidity of High Moisture Lignite

Experimental investigation on the gravity driven discharge of cohesive particles from a silo with two outlets

Flow Characteristics of Granular Coal in Aeration Silo

Flow characteristics of pulverized coal from aeration silo

Effect of Moisture Content on Flow Behavior and Resistance Characteristics of Dense-Phase Pneumatic Conveying

The Effect of Water Addition on the Surface Energy, Bulk and Flow Properties of Lignite

Study on Some Factors Impacting Flowability of Pulverized Coal

Effect of moisture content on conveying characteristics of pulverized coal for pressurized entrained flow gasification

Effects of Particle Size and Moisture Content of Shenfu Soft Coal Powder on Its Fluidity Parameters

Study on solid-liquid transition behaviors of cohesive powders and predict the critical arch-breaking gas flow rate