Studying the Fracture Characteristics of Fractured Rock Mass after Microwave Irradiation
Yuan Shihao,Sun Qiang,Bai Guogang,Chen Zupeng,Ge Zhenlong
DOI: https://doi.org/10.1007/s12665-022-10491-w
IF: 2.8
2022-01-01
Environmental Earth Sciences
Abstract:This study explored the influence of X-shaped joint cracks and microwave irradiation on the failure characteristics of gabbro. Gabbro samples with joint angles of 15°, 30°, 45°, 60°, and 75° were subjected to microwave irradiation treatment for three, seven, or eleven minutes at 0.89, 1.47, or 1.89 kW. This study analysed the sample quality, chromaticity, and temperature changes before and after microwave irradiation, and analysed the failure characteristics and failure modes under pressure. The main research results are as follows. First, the surface temperature of gabbro increased linearly with irradiation time and the mass-loss rate increased with increasing microwave irradiation time and power. Furthermore, the colour coordinate of the sample was also altered by microwave irradiation; the red-green component a* changed from green to red while the yellow-blue component b* changed from blue to yellow. Second, the compressive strength of the sample increased with increasing conjugate joint angle α and decreased with increasing microwave power. Third, under compression, the jointed gabbro sample showed four failure modes. Increasing joint angle caused the failure mode of gabbro to change from Mode I, IV (15°) → Mode I, II (30°, 45°) → Mode I, II, III (60°) → Mode III (75°).