Abstract:TiO2-SiO2 composites with different Ti/Si atomic ratios were synthesized by an optimized pre-hydrolysis-co-precipitation method while the corresponding NiMo supported hydrodenitrogenation (HDN) catalysts were prepared by incipient wetness impregnation method. The significant structure of serial TiO2-SiO2 composites was determined by XRD, FT-IR, N2 physical adsorption–desorption and NH3-TPD techniques, and the distributions of TiO2 particles within SiO2 matrix were also illustrated under the help of SEM-EDS. In this work, it can be concluded that the Ti/Si atomic ratio has a large effect on the textural characteristics and the acidity distribution of composites. Among the self-made composites, TS-1 samples (Ti: Si = 1) presented the highest specific surface area (SBET = 230.42 m2/g) and the highest proportion of weak acidity. And then, characterization of the NiMo/TS-n catalysts were performed by H2-TPR, HRTEM and XPS. Among the NiMo/TS-n catalysts, NiMo/TS-1 catalysts presented the particularly favorable dispersion of active metals and the largest proportion of “Ni-Mo-S” active phase. The results of the adsorption tests showed that NiMo/TS-4 catalysts presented the maximum value of adsorption coefficient (ACQ). Compared these ACQ, these adsorption sites of quinoline were attributed to the CUS supported by “Ni-Mo-S” structures as well as the strong acid sites by excessive TiO2 particles. Finally, these catalysts were tested by feeding 1.0 wt% quinoline as the reactant under the constant reaction conditions. However, the results of HDN evaluation showed that NiMo/TS-1 catalyst exhibited the best HDN activity (51.31 %) and the highest value of turnover frequency (TOFQ = 4.77 h−1), which was attributed to the formation of maximum Ti-O-Si bonds providing moderate acidity, appropriate MSI, suitable size of MoS2 slabs and “Ni-Mo-S” active phase having high concentration of CUS and Mo-SH/S2− species.

Single-Pot Synthesis of NiMo-Al2O3 Catalyst for Quinoline Hydrodenitrogenation

Single-Pot Synthesis of NiMo-Al 2 O 3 Catalyst for Quinoline Hydrodenitrogenation

Synthesis of Novel NiMo Catalysts Supported on Highly Ordered TiO2-Al2O3 Composites and Their Superior Catalytic Performance for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

New NiMo catalysts supported on sulfuric acid modified halloysite nanotubes for quinoline hydrodenitrogenation

Synergetic effect between sulfurized Mo/γ-Al2O3 and Ni/γ-Al2O3 catalysts in hydrodenitrogenation of quinoline

A Study on the Role of Ni Atoms in the HDN Activity of NiMoS2/Al2O3 Catalyst

Hydrodenitrogenation of quinoline over ex-situ presulfided MoNiP/γ-Al2O3 hydrotreating catalysts

Synthesis of NiW Supported on an Al-Modified Cubic Ia3d Mesoporous KIT-5 Catalyst and Its Hydrodenitrogenation Performance of Quinoline

Synergetic Effect Between Ni2P/γ-Al2O3 and MoS2/γ-Al2O3 Catalysts on Their Performance in Hydrodenitrogenation of Quinoline

Hydrodenitrogenation of Quinoline Catalyzed by MCM-41-Supported Nickel Phosphides

Hydrodenitrogenation of Quinoline with High Selectivity to Aromatics over Α-Moc1-x

HYDRODENITROGENATION OF QUINOLINE OVER EX-SITU PRESULFIDED MoNiP/γ-Al2O3 CATALYSTS

Mutual Influence of Hydrodesulfurization of Dibenzothiophene and Hydrodenitrogenation of Quinoline over NiMoS/γ-Al_2O_3 Catalyst

One-pot Synthesis of Ordered Mesoporous NiMo-Al 2 O 3 Catalysts for Dibenzothiophene Hydrodesulfurization

Efficient one pot synthesis of mesoporous NiMo-Al2O3 catalysts for dibenzothiophene hydrodesulfurization

Hydrodenitrogenation of quinoline catalyzed by SiO2-supported molybdenum phosphide

Preparation and HDN activity of NiMoNx/γ-Al2O3 catalyst

A study on the role of Ti/Si atomic ratios in the hydrodenitrogenation activity of NiMo/TiO2-SiO2 catalyst

Highly Dispersed Ni Nanoparticles Encapsulated in Hollow Mesoporous Silica Spheres As an Efficient Catalyst for Quinoline Hydrogenation

One Pot Synthesis of NiMo–Al2O3 Catalysts by Solvent-Free Solid-State Method for Hydrodesulfurization

Al-modified Dendritic Mesoporous Silica Nanospheres-Supported NiMo Catalysts for the Hydrodesulfurization of Dibenzothiophene: Efficient Accessibility of Active Sites and Suitable Metal–support Interaction