Abstract:Accuracy detection for five-axis numerical control (NC) machine tools that can truly reflect their practical machining precision is of crucial importance. Standard test pieces are commonly employed for this purpose. However, poor accuracy detection performance is obtained when the test pieces used here are applied to five-axis NC machine tools. This paper introduces a new S-shaped test piece that is exclusively designed for the precision detection of five-axis NC machine tools. The S-shaped test piece integrates numerous characteristics associated with aviation parts and has been widely adopted by machine tool makers. This article presents a numerical model of the latest S-shaped test piece and shows that its side surfaces represent typical undevelopable ruled surfaces. The curvature changes along the ruled lines inevitably produce a theoretical error. Thus, machining methods seek to reduce the theoretical error as much as possible. Based on basic summaries of five existing positioning algorithms, a novel algorithm is proposed to position the tool head using three points, wherein two are tangential to the top and bottom boundary curves, respectively, and the third is tangential to the midpoint of the ruled line. The proposed positioning algorithm together with five existing positioning algorithms is applied to the S-shaped test piece, and a numerical error performance analysis is conducted. The results indicate that the machined surface reduces the theoretical error by at least 96% compared to all the existing numerical positioning algorithms except for Redonnet's algorithm. Compared with Redonnet's algorithm, the accuracy of the proposed algorithm is equivalent, although the proposed algorithm reduces the calculation time by 62.7%, and is not sensitive to the initial values. Hence, the computational process demonstrates that the proposed method is efficient, robust, and universal. Finally, simulation results were confirmed through an actual machining experiment.

Tool diameter optimization in S-shaped test piece machining

Latest Development of A New Standard for the Testing of Five-Axis Machine Tools Using an S-Shaped Test Piece

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

Numerical Simulation and Analysis of Symmetry and Step-symmetry Milling of Aerospace Thin-walled Workpiece

An Improved Positioning Method for Flank Milling of S-shaped Test Piece

A Novel Approach to Calculating the Dynamic Error Reflected on an S-shaped Test Piece

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Theoretical Error Compensation when Measuring an S-shaped Test Piece

Geometric Deviation Reduction Method for Interpolated Toolpath in Five-Axis Flank Milling of the S-shaped Test Piece

A Computer Aided Tool Selection System For 3d Die/Mould-Cavity Nc Machining Using Both A Heuristic And Analytical Approach

Parametric Study on the Tool Inclination Angle for Side Milling Thin-Walled Workpiece Edges Based on Finite Element Simulation

Finite Element Deformation Analysis of Long Thin Cantilever Shape Parts in High Speed Ball End Milling of Titanium Alloy Ti-6Al-4V with PCD Tools at Various Tool Inclination Angles

Numerical simulation and tool parameters optimization of aluminum alloy transmission intermediate shell

Optimizing Design of the Cutting Tool in Cutting of Ultra-High Strength Steel Beam Part

Research on tool diameter and processing width optimization for highly efficient machining of complex surfaces constrained by machining interference surface

Noninterference tool orientations and maximum taper angles of conical cutters in 4-axis milling of complex channel parts

A Novel Method for Evaluating the Validity of Dynamic Accuracy Test Pieces for Five-Axis Machine Tools

Dynamic Accuracy Evaluation for Five-Axis Machine Tools Using S Trajectory Deviation Based on R-test Measurement

Comprehensive Evaluation Analysis and Optimization Methodology of Tool Geometric Parameters for High Speed Cutting

Tool Orientation Optimization Considering Cutter Deflection Error Caused by Cutting Force for Multi-Axis Sculptured Surface Milling

Asymmetrical cutting-edge design of broaching tool based on FEM simulation