Abstract:TiB2 particulate reinforced aluminum matrix composites (TiB2/Al-MMCs) have received extensive attention due to a great potential in a wide variety of applications. Nano-TiB2/Al-MMCs have also received attention from scholars with the development of nanotechnology in recent years. However, obstacles like agglomeration of nanoparticles in the matrix, and the difficulty of preparation of nanoparticulate reinforced metal matrix composites (PRMMNCs) still need to be resolved. This study summarizes the research progress of Al-matrix composites (Al-MMCs) in recent years and exemplifies the common preparation methods. Experiments were designed to study the common problems in the preparation of composite materials. Two experiments were designed and completed in this study. First, TiB2/Al-4.5Cu composites were synthesized through a mixed salt reaction method. The distribution of reinforcing particle in the aluminum matrix was observed. The predictive model of particle behavior in Al-4.5wt. %Cu matrix based on thermodynamic laws was re-examined. The experiment results are inconsistent with the prediction from a classic prediction model. Regardless of the rate of solidification and critical velocity (VC), the most of the particles are rejected by advancing solid-liquid interface. Through review of classic particle pushing theory, this study attempts to derive a new boundary condition used to predict the behavior of reinforcing particles in a metal matrix during solidification based on the diffusion convection equations. Second, nano-TiB2/Al composites with a variety of volume fractions were synthesized by ultrasound assistance in a stirring method. The research has focused on optimization and improvement of preparation methods. High-energy ball milling (HEBM) and high-intensity ultrasound (HIU) were introduced into the fabrication process. Furthermore, a forging post-treatment process is used to process as-cast samples prepared by the experiment, so that the reinforcing particles in the composite material can be redistributed. The experiment results show that HEBM facilitates the mixing of nano-TiB2 particles with salts. HIU helps distribute particles evenly throughout the matrix. The Vickers hardness and tensile strength of the composites were tested. The results indicated that the forging treatment has great influence on the mechanical properties of composite materials.

Comprehensive Study on the Cutting Specific Energy and Surface Roughness of Milled in Situ TiB2/Al Composites and Al Alloys

Microstructure and Wear-resistant Properties of in situ TiB-TiC Reinforced Titanium Matrix Composites by Laser Deposition Manufacturing

Study on the Orthogonal Cutting Process of Al7050T7451 with Uncoated and Coated Tools

Simulation and Experimental Investigation on Electrochemical Milling of TiB2/7050 Aluminum Matrix Composites

Preparation and Characterization of In Situ (TiC-TiB2)/Al-Cu-Mg-Si Composites with High Strength and Wear Resistance

The Effect of Micron-Sized TiB2 Particles on the Properties of Al6061 Strengthened with 4% TiB2 Nano-TiB2

Investigation of Mechanical and Tribological Properties of Al6061–TiB2 Metal Matrix Composites

Microstructure and Mechanical Properties of In Situ TiB2/2024 Composites Fabricated by Powder Metallurgy

WEDM Characteristics of Stir-Cast Al-TiB2 Metal Matrix Composites

Microstructural modulation of TiAl alloys for controlling ultra-precision machinability

Experimental study on machining properties of a high-strength composite material with Ti-555 titanium alloy matrix

In-situ TiB2-TiC reinforced Fe-Al composite coating on 6061 aluminum alloy by laser surface modification

Preparation of in situ TiC@TiN core–shell and Ti2N–Al4C3 nanoparticles and their effects on Al–Zn–Mg–Cu alloy

Influence of the friction and wear performance of TiB2/7075 aluminum-based composite materials prepared by friction stir processing

Effects of tool coating and tool wear on the surface and chip morphology in side milling of Ti2AlNb intermetallic alloys

Effect of TiB2 particles on thermal deformation behavior and mechanical properties of aluminum alloy

STUDY ON THE PREPARATION OF NANO-TIB2 REINFORCED AL MATRIX COMPOSITES

Influence of Cutting Conditions on the Wear Resistance of Tools with a TiB2 Coating during Titanium Alloy Machining

Influence of TiC Particles on Mechanical and Tribological Characteristics of Advanced Aluminium Matrix Composites Fabricated through Ultrasonic-Assisted Stir Casting

Investigation on cutting forces in ultrasonic vibration assisted milling of particle-reinforced titanium matrix composites (PTMCs)

Investigation of the Wear Performance of TiB2 Coated Cutting Tools during the Machining of Ti6Al4V Alloy