Abstract:In the present research, the TiN/Ti multilayer coatings with different layers were fabricated on Ti6Al4V substrates with same deposition time by high-power DC reactive magnetron sputtering. Their microstructure, phase constituent, mechanical properties and wear behavior were studied to explore the influence of the layer number. The results reveal that increasing of layer number in TiN/Ti multilayer coatings refines the grains and promotes the transformation of the crystal orientation preference of the TiN layer from (111)(TiN) to a mixture of (111)(TiN), (200)(TiN) and (220)(TiN). Moreover, the thickness of the TiN/Ti multilayer coating increases with the increased layer number. The Ti interlayer and TiN layer have a sinuous interface at the atomic scale with many dislocations, and no orientation relationship between these layers is found. With the increasing of layer number, the elastic modulus and hardness of the TiN/Ti multilayer coatings increase firstly and then decrease. The two-layer and four-layer TiN/Ti multilayer coatings obtain the maximum elastic modulus and hardness, respectively. Moreover, the increased layer number improves the adhesion of the TiN/Ti multilayer coating obviously, and the twelve-layer TiN/Ti multilayer coating obtains the highest adhesion, which could be ascribed to the relaxation of interfacial stress. The increased Ti interlayers promote the diversification of the friction coefficient of the TiN/Ti multilayer coatings. With the proceeding of wear test, the friction coefficients of the one-layer and two-layer TiN/Ti multilayer coatings maintain an increasing tendency, but the friction coefficients of the four-layer, eight-layer and twelve-layer TiN/Ti multilayer coatings drop at final, middle and initial stage, respectively. The one-layer, two-layer and four-layer TiN/Ti multilayer coatings have similar wear rates which are less than one twentieth of the wear rate of the Ti6Al4V substrate. While the wear rates of the eight-layer and twelve-layer TiN/Ti multilayer coatings are higher than that of the Ti6Al4V substrate.

Interface Enhanced Mechanical and Thermal Properties of TiSiN/TiAlN Multilayers

Mechanical and thermal properties of AlN/Ti1-xAlxN (x = 0, 0.45 and 0.62) multilayers

Structural, Mechanical, and Thermal Properties of the TiAlTaN/TiAlBN Multilayer

Structure, mechanical and thermal properties of TiAlBN/TiAlN multilayers

Structure, Mechanical and Tribological Properties of Self-Toughening TiSiN/Ag Multilayer Coatings on Ti6Al4V Prepared by Arc Ion Plating

Influence of multi-interfacial structure on mechanical and tribological properties of TiSiN/Ag multilayer coatings

Investigation on the Interface Structure, Mechanical Properties, and Thermal Stability of TiAlSiN/TiAlN Multilayers

Preparation and Mechanical Properties of TiN/AlN Nano Multilayers

Structure and Thermomechanical Properties of Superlattice-Stabilized TiNbTaZrSiAlN High-Entropy Coating

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

Mechanical properties, thermal stability and oxidation resistance of TiN/CrN multilayer coatings

Structure, mechanical properties and thermal stability of CrAlNbN/TiN multilayers

Influence of Si and Ta mixed doping on the structure, mechanical and thermal properties of Ti Al N coatings

Structure, mechanical and thermal properties of Ti1−x−y−zAlxTayBzN coatings

The influence of multilayer structure on mechanical behavior of TiN/TiAlSiN multilayer coating

Properties and Performance of TiAlSiN and AlCrN Monolayer and Multilayer Coatings for Turning Ti-6Al-4V

Influence of Layer Number on Microstructure, Mechanical Properties and Wear Behavior of the TiN/Ti Multilayer Coatings Fabricated by High-Power Magnetron Sputtering Deposition

Microstructural and Performance Analysis of (TiAl)95−xCu5Nix Coatings Prepared via Laser Surface Cladding on Ti–6Al–4V Substrates

Influence of Bilayer Thickness on Mechanical and Tribological Properties of (Ti-Al)N/MoN Nanostructured Hard Coatings Deposited by Cathodic Arc Ion Plating

Effect of Multilayered Structure on Properties of Ti/TiN Coating

Mechanical Properties and Thermal Stability of TiAlN/Ta Multilayer Film Deposited by Ion Beam Assisted Deposition