Abstract:Recently, due to its superior characteristics and simple manufacture, such as small size, low loss, high sensitivity and convenience to couple, the optical fiber sensor has become one of the most promising sensors. In order to achieve the most effective realization of light propagation by changing the structure of sensors, FOM(S center dot Q/lambda(res)), which is determined by two significant variables Q-factor and sensitivity, as a trade-off parameter should be optimized to a high value. In typical sensors, a high Q can be achieved by confining the optical field in the high refractive index dielectric region to make an interaction between analytes and evanescent field of the resonant mode. However, the ignored sensitivity is relatively low with a high Q achieved, which means that the resonant wavelength shift changes non-obviously when the refractive index increases. Meanwhile, the sensitivity also leads to a less desirable FOM. Therefore, a gradient structure, which can enhance the performance of sensors by achieving high Q and high sensitivity, has been developed by Kim et al. later. Here, by introducing parabolic-tapered structure, the light field localized overlaps strongly and sufficiently with analytes. And based on a one-dimensional photonic-crystal nanofiber air-mode cavity, a creative optical fiber sensor is proposed by combining good stability and transmission characteristics of fiber and strengths of tapered structure, realizing excellent FOM similar to 4.7x10(5) with high Q-factors (Q similar to 10(6)) and high sensitivities (>700 nm/RIU).

Highly Sensitive Nanoparticle Sensing Based on a Hybrid Cavity in a Freely Suspended Microfiber

An optical nanofibre-enabled on-chip single-nanoparticle sensor

Sensing of Microparticles Based on a Broadband Ultrasmall Microcavity in a Freely Suspended Microfiber

Nanoparticles: Single Nanoparticle Detection and Sizing Using a Nanofiber Pair in an Aqueous Environment (Adv. Mater. 44/2014)

Ultra-Sensitive Nanofiber Fluorescence Detection In A Microfluidic Chip

Single Nanoparticle Detection and Sizing Using a Nanofiber Pair in an Aqueous Environment.

Single Nanoparticle Detection Using Optical Microcavities

Temperature-insensitive Detection of Low-Concentration Nanoparticles Using a Functionalized High-Q Microcavity

Single nanoparticle detection and sizing by using a nanoscale optical fiber

Enhanced Evanescent Field Coupling of Smart Particles in Tubular Optical Microcavity for Sensing Application

Enhanced Nanoparticle Sensing by Mode Intensity in a Non-Reciprocally Coupled Microcavity

Detection of Single Nanoparticles Using the Dissipative Interaction in a High-Q Microcavity

Optical Cavity-Enhanced Localized Surface Plasmon Resonance for High-Quality Sensing

Photonic Crystal Nanofiber Air-Mode Cavity With High Q-Factor And High Sensitivity For Refractive Index Sensing

High Sensitivity and High Q-Factor Nanoslotted Parallel Quadrabeam Photonic Crystal Cavity for Real-Time and Label-Free Sensing

Hybrid plasmonic microcavity with an air-filled gap for sensing applications

Particle-in-Molybdenum Disulfide-Coated Cavity Structure with a Raman Internal Standard for Sensitive Raman Detection of Water Contaminants from Ions to <300 Nm Nanoplastics

<strong>Optical Microcavity Sensing: Single-nanoparticle Detection</strong>

High sensitivity Optical Humidity Sensing Based on Polymer Microfiber Cavity Coupled Metallic Nanorod

Highly Sensitive Optical Fiber Micro-Cavity Sensors

Nanoparticle Sensing Based on High-Q Silicon Photonic Crystal Nanobeam Cavity