Abstract:In this research, the dynamic change of laser keyhole of vertical oscillating laser keyhole was studied, and it was found that the laser keyhole depth was periodic. The keyhole depth decreased with the increase of oscillation amplitude and frequency, but the stability of the keyhole increased. This was closely related to the energy distribution of oscillating laser. The special energy distribution made the "two molten pools" phenomenon appear in oscillating laser tungsten inert gas (TIG) hybrid welding, and the grains in the keyhole molten pool were smaller than those in the conduction molten pool. The narrow gap (NG) oscillating laser TIG hybrid welding (OL-T) was carried out, and the microstructure and mechanical properties of OL-T welding were compared with that of TIG welding and general laser TIG hybrid welding (L-T). The grain of the OL-T welding seam was refined because the OL-T welding had a lower line energy, which changed the crystalline morphology of the welding seam. The tensile strength of the weld joint was almost equivalent to that of TIG welding and base metal, reaching 559 MPa. It was observed that there was no lack of sidewall fusion in the welding seam of the NG OL-T welding, and the weld efficiency was much higher than that of TIG welding. The morphology of the molten pool in oscillating laser-TIG hybrid welding and the arc shape in the groove were collected using high-speed cameras. It was observed that the elimination of lack of sidewall fusion in NG welding mainly depended on the direct heating on the sidewall and stirring molten pool by oscillation laser.

Characteristics of droplet transfer, molten pool formation, and weld bead formation of oscillating laser hot-wire tungsten inert gas hybrid welding

Characteristic of keyhole, molten pool and microstructure of oscillating laser TIG hybrid welding

Welding Characteristics in Different Laser-Tig Hybrid Manners

Behavior and Stability of Droplet Transfer under Laser-Mig Hybrid Welding with Synchronized Pulse Modulations

Droplet detachment and motion behaviors in laser-MIG hybrid welding of aluminum alloy

Influence of Laser Beam Oscillation on Welding Stability and Molten Pool Dynamics

Effect of beam oscillation on microstructure and properties of laser-TIG hybrid welding of D406A ultra-high strength steel

Study of Welding Characteristics in CO2 Laser-Tig Hybrid Welding Process

Effect of energy parameters on droplet transfer behavior and weld formation in laser-arc hybrid welding with cable-type welding wire

Experimental Study on Welding Characteristics of Co2 Laser Tig Hybrid Welding Process

Characteristics of Droplet Transfer in CO2 Laser-Mig Hybrid Welding with Short-Circuiting Mode

Effect of multiple hit and break of oscillating pulse laser-TIG hybrid welding on porosity suppression of ultra-high strength steel

Influence of the Laser Thermal Effect on the Droplet Transfer Behavior in Laser-Cmt Welding

Melt Flow and Microstructural Characteristics in Beam Oscillation Superimposed Laser Welding of 304 Stainless Steel

Effects of oscillating molten pool flow on the weld formation and mechanical performance of titanium alloy joints

Study on Coupling Mechanism and Metal Transfer in Laser Double-Wire MIG Arc Hybrid Welding

Droplet transfer characteristics in high-power laser–MAG hybrid welding: Influence of energy parameters

Influencing mechanism of high speed on the droplet transfer and process stability during high-power laser-arc hybrid welding

Numerical Simulation on Porosity Formation and Suppression in Oscillation Laser Welding of Ti-6Al-4V Alloy

Effect of Wavelength on Droplet Transition Behaviors in Laser-CMT Hybrid Welding Process

Study on droplet transfer mechanical behavior in laser-MIG hybrid welding process