Abstract:Many applications, such as multi-standard wireless and event-driven IoT devices, demand high-resolution ADCs with scalable sampling rate and power consumption. The conventional pipelined ADC can achieve high resolution, but its power does not scale well with the sampling rate due to the use of a closed-loop static OTA for residue amplification. While the OTA can be turned off to save power, it requires considerable time for the bias circuit and CMFB loop to settle when waking up, leading to wasted power and reduced peak operation frequency. Using an open-loop dynamic amplifier can make power scale linearly with frequency, but its gain varies with PVT and often requires background calibration, which converges slowly and is incompatible with event-driven applications. The ring-amp is a promising solution as it features closed-loop operation, easy duty-cycling, and decaying power over time [1]-[4]. However, its stability depends on the dead zone size, which typically requires trimming across PVT variations. Besides, the 1st stage has a constant operating point during amplification, which consumes considerable energy. A recent work proposed a 2-stage floating inverter amplifier (FIA) that is fully dynamic and works in closed-loop [5]. It guarantees stability and does not need dead zone control. Moreover, the power consumptions of all stages decay over time naturally. Nevertheless, its low open-loop gain of 33dB is inadequate for a high-resolution pipelined ADC, and its fast-quenching 2 <sup>nd</sup> stage reduces the amplifier speed, limiting the usage in high-speed designs.

A 100MS/s Linear Gain-Boosted Capacitively Degenerated Dynamic Amplifier for Pipelined ADCs

A Parasitic Elimination Bootstrapped Switch and a Fast Settling Residual Amplifier for High-Speed and High-Resolution Pipelined ADC

A Single-Stage Gain-Boosted Cascode Amplifier with Three-Layer Cascode Feedback Amplifier for Front-End SHA in High-Linearity Pipelined ADC

A 14bit 500MS/s 85.62dBc SFDR 66.29dB SNDR SHA-less pipelined ADC with a stable and high-linearity input buffer and aperture-error calibration in 40nm CMOS

A Maximum-Likelihood-Estimation-Based Digital Background Calibration Technique for Interstage Gain Error in Pipelined ADCs

A Σδ Modulator Using Gain-Boost Class-C Inverter for Audio Applications.

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

A Capacitively-Degenerated High-Linearity Dynamic Amplifier Using a Real-Time Gain Detection Technique

A 10-bit 30-MS/s 50mW pipelined A/D converter

A 150 MS/s 10-Bit CMOS Pipelined Subranging ADC with Time Constant Reduction Technique.

Smdac Design With Nested Gain Boosted Opamp For A 14-Bit 200-Ms/S Pipelined Adc

A 10-bit 20-Msample/s 49mW CMOS pipelined A/D converter

A 10 bit 100 MS/s Pipelined A/D Converter Implemented in Digital CMOS Process

A 16 Bit 125 MS/s Pipelined Analog-to-Digital Converter with a Digital Foreground Calibration Based on Capacitor Reuse

A 14-Bit 100-Ms/S Cmos Pipelined Adc Featuring 83.5-Db Sfdr

A 14-bit 300MHz pipelined DEM DAC with enhanced dynamic linearity

A 0.4-to-40MS/s 75.7dB-SNDR Fully Dynamic Event-Driven Pipelined ADC with 3-Stage Cascoded Floating Inverter Amplifier

A 48-Mw, 12-Bit, 150-Ms/s Pipelined ADC with Digital Calibration in 65nm CMOS

A 50MS/s 80dB SFDR digital calibrated pipelined ADC with workload-balanced MDAC

A High Linearity,13bit Pipelined CMOS ADC

9.4 A 182.3dB FoM<inf>s</inf> 50MS/s Pipelined-SAR ADC using Cascode Capacitively Degenerated Dynamic Amplifier and MSB Pre-Conversion Technique