Abstract:In this study, we propose a tightly coupled integrated method of ultrawideband (UWB) and light detection and ranging (LiDAR)-based simultaneous localization and mapping (SLAM) for global navigation satellite system (GNSS)-denied environments to achieve high-precision positioning with reduced drift. Specifically, we focus on non-line-of-sight (NLOS) identification and correction. In previous work, we utilized laser point cloud maps to identify and exclude NLOS measurements in real time to attenuate their severe effects on the integrated system. However, the complete exclusion of NLOS measurements will likely lead to deterioration in the dilution of precision (DOP) for the remaining line-of-sight (LOS) anchors, counterproductively introducing large positioning errors into the integrated system. Therefore, this study considers the ranging accuracy and geometric distribution of UWB anchors and innovatively proposes an NLOS correction method using a grey prediction model. For a poor line-of-sight (LOS) anchor geometric distribution, the grey prediction model is used to fill in the gaps by predicting the NLOS measurements based on historical measurements. Including the corrected measurements effectively improves the original poor geometric configuration, improving the system positioning accuracy. Since conventional filtering-based fusion methods are exceedingly sensitive to measurement outliers, we use state-of-the-art factor graph optimization (FGO) to tightly integrate the UWB measurements (LOS and corrected measurements) with LiDAR-SLAM. The temporal correlation between measurements and the redundant system measurements effectively enhance the robustness of the integrated system. Experimental results show that the tightly coupled integrated method combining NLOS correction and FGO improves the positioning accuracy under a poor geometric distribution, increases the system availability, and achieves better positioning than filtering-based fusion methods with a root-mean-square error of 0.086 m in the plane direction, achieving subdecimeter indoor high-precision positioning.

Lidar/UWB Fusion Based SLAM with Anti-Degeneration Capability

UWB/Lidar Coordinate Matching Method With Anti-Degeneration Capability

Degeneration-Aware Localization with Arbitrary Global-Local Sensor Fusion.

Accurate and Robust State Estimation via Fusion of Visual-Inertial-UWB with Time Synchronization

UWB/LiDAR Fusion For Cooperative Range-Only SLAM

Research on a Visual/Ultra-Wideband Tightly Coupled Fusion Localization Algorithm

A Real-time Degeneracy Sensing and Compensation Method for Enhanced LiDAR SLAM

LVI-Fusion: A Robust Lidar-Visual-Inertial SLAM Scheme

SLAM Algorithm Based on Heterogeneous Sensor Data Fusion

Augmented UWB-ZUPT-SLAM Utilizing Multisensor Fusion

A Robust Lidar SLAM System Based on Multi-Sensor Fusion

NLOS Identification- and Correction-Focused Fusion of UWB and LiDAR-SLAM Based on Factor Graph Optimization for High-Precision Positioning with Reduced Drift

Hierarchical Fusion based High Precision SLAM for Solid-State Lidar

UVIO: Adaptive Kalman Filtering UWB-Aided Visual-Inertial SLAM System for Complex Indoor Environments

A Novel Loosely Coupling Fusion Approach of Ultra-Wideband and Wheel Odometry for Indoor Localisation

An adaptive scheme for degradation suppression in Lidar based SLAM

Selective Kalman Filter: When and How to Fuse Multi-Sensor Information to Overcome Degeneracy in SLAM

Lidar-Inertial SLAM Method for Accurate and Robust Mapping

New SLAM fusion algorithm based on Lidar/IMU sensors

A High-Precision SLAM System Based on Lidar, IMU and Wheel Encoders

Research on indoor positioning and navigation method of AGV based on multi-sensor fusion