Abstract:In this study, we propose a tightly coupled integrated method of ultrawideband (UWB) and light detection and ranging (LiDAR)-based simultaneous localization and mapping (SLAM) for global navigation satellite system (GNSS)-denied environments to achieve high-precision positioning with reduced drift. Specifically, we focus on non-line-of-sight (NLOS) identification and correction. In previous work, we utilized laser point cloud maps to identify and exclude NLOS measurements in real time to attenuate their severe effects on the integrated system. However, the complete exclusion of NLOS measurements will likely lead to deterioration in the dilution of precision (DOP) for the remaining line-of-sight (LOS) anchors, counterproductively introducing large positioning errors into the integrated system. Therefore, this study considers the ranging accuracy and geometric distribution of UWB anchors and innovatively proposes an NLOS correction method using a grey prediction model. For a poor line-of-sight (LOS) anchor geometric distribution, the grey prediction model is used to fill in the gaps by predicting the NLOS measurements based on historical measurements. Including the corrected measurements effectively improves the original poor geometric configuration, improving the system positioning accuracy. Since conventional filtering-based fusion methods are exceedingly sensitive to measurement outliers, we use state-of-the-art factor graph optimization (FGO) to tightly integrate the UWB measurements (LOS and corrected measurements) with LiDAR-SLAM. The temporal correlation between measurements and the redundant system measurements effectively enhance the robustness of the integrated system. Experimental results show that the tightly coupled integrated method combining NLOS correction and FGO improves the positioning accuracy under a poor geometric distribution, increases the system availability, and achieves better positioning than filtering-based fusion methods with a root-mean-square error of 0.086 m in the plane direction, achieving subdecimeter indoor high-precision positioning.

UWB/Lidar Coordinate Matching Method With Anti-Degeneration Capability

Lidar/UWB Fusion Based SLAM with Anti-Degeneration Capability

Anti-degenerated UWB-LiDAR Localization for Automatic Road Roller in Tunnel

Robust Indoor Localization and Map Matching Algorithm with Visual SLAM

Improved-UWB/LiDAR-SLAM Tightly Coupled Positioning System with NLOS Identification Using a LiDAR Point Cloud in GNSS-Denied Environments

Augmented UWB-ZUPT-SLAM Utilizing Multisensor Fusion

LiDAR-IMU-UWB-Based Collaborative Localization

Research on a Visual/Ultra-Wideband Tightly Coupled Fusion Localization Algorithm

Accurate and Robust State Estimation via Fusion of Visual-Inertial-UWB with Time Synchronization

UWB/LiDAR Fusion For Cooperative Range-Only SLAM

UWB/MEMS IMU integrated positioning method based on NLOS angle discrimination and MAP constraints

NLOS Identification- and Correction-Focused Fusion of UWB and LiDAR-SLAM Based on Factor Graph Optimization for High-Precision Positioning with Reduced Drift

UVIO: Adaptive Kalman Filtering UWB-Aided Visual-Inertial SLAM System for Complex Indoor Environments

An adaptive scheme for degradation suppression in Lidar based SLAM

A Real-time Degeneracy Sensing and Compensation Method for Enhanced LiDAR SLAM

UWB/LiDAR Tightly Coupled Positioning Algorithm Based on ISSA Optimized Particle Filter

MR-ULINS: A Tightly-Coupled UWB-LiDAR-Inertial Estimator with Multi-Epoch Outlier Rejection

A GNSS UWB tight coupling and IMU ESKF algorithm for indoor and outdoor mixed scenario

Cost-effective Mapping of Mobile Robot Based on the Fusion of UWB and Short-range 2D LiDAR

Design a novel algorithm for enhancing UWB positioning accuracy in GPS denied environments

Tightly Coupled LIDAR/IMU/UWB Fusion via Resilient Factor Graph for Quadruped Robot Positioning