Abstract:Sintering behaviour of ashes from combustion of coal and biomass blends was experimentally investigated with a focus on the effect of ash preparation method. Blends of a Chinese anthracite, Jincheng coal, and two biomass materials, a wheat straw and a pine sawdust, respectively, were subjected to three different ash preparation procedures, namely, a low temperature oxygen plasma ashing device operating at ca 150 degrees C, combustion in a Muffle furnace at 815 degrees C and in a drop tube furnace at 1500 degrees C. The resulting ash samples were then subjected to the sintering temperature measurement using a pressure-drop sintering device, morphological and mineralogical characterisation using scanning electron microscope (SEM) fitted with X-ray energy dispersive spectroscopy (EDS) and X-ray diffractometry analyser (XRD), respectively. For the same coal and biomass blends but different ash preparation methods, the sintering temperatures were always the lowest for the ash samples from the plasma ashing device and the highest from drop tube furnace. SEM imaging showed that the texture of ash samples from the plasma ashing device was irregular, loose and more fibrous, indicating little interactions among the different mineral and inorganic constituents in the individual fuels. The muffle furnace and drop tube furnace ashes were denser and more uniform in shape as the mineral matter and inorganics became fused together. In addition, the drop tube furnace ashes were mostly in spherical-shape, indicating ash melting had occurred during combustion. The XRD analysis revealed that different minerals were present in the ash samples due to different ash preparation temperatures, with high temperature minerals present in the drop tube furnace ash. Biomass addition in the blends lowered the sintering temperature of corresponding ash; the higher the proportion of biomass in the blend, the lower the ash sintering temperature regardless the ashing method. At the same biomass addition ratio, the ash sintering temperature of the blend with the wheat straw addition was lower than that with the pine sawdust addition, because the wheat straw had a higher K and Cl content but lower Ca than the pine sawdust. The EDS and XRD analyses confirmed that the ashes of coal/wheat straw blends contained more K-bearing minerals, while the ashes of the coal/pine sawdust contained more Ca and K-bearing minerals. Both Ca and K-bearing minerals reacted with other minerals in the ash to form low temperature eutectics, leading to the reduction of sintering temperatures of the coal and biomass blends. However, the melting points of the K-containing minerals are higher than the Ca-containing minerals, therefore, the sintering temperatures of ash with the wheat straw addition were lower than those with the pine sawdust addition. (C) 2016 Elsevier Ltd. All rights reserved.

Evaluation and Optimization of Preparation for Semi-Coke Briquette with Alkali-Heat Treated Wheat Straw Binder

Carbonization Temperature and Time Improving Quality of Charcoal Briquettes

Experimental Study on Pyrolysis and Combustion Properties of Biomass Briquette.

High Strength Clean Briquettes Production from Long‐flame Coal Fines by Using Polyvinyl Alcohol and Coal Slime As Binders

Semi-coke briquettes: towards reducing emissions of primary PM 2.5 , particulate carbon and carbon monoxide from household coal combustion in China

Parameter Optimization of Waste Coal Briquetting and Particulate Matter Emissions Test During Combustion: A Case Study.

An Experimental Study On Biomass Coal Briquetting Process

Clean Preparation of Formed Coke from Semi-coke by the Carbonated Consolidation Process

Binder-type effect on the physico-mechanical, combustion and emission properties of Alstonia boonei De Wild. sawdust and Theobroma cacao L. pod biochar briquettes for energy applications

Combustion Characteristics, Kinetics, SO2 and NO Release of Low-Grade Biomass Materials and Briquettes

Study on improving the performance of blended Semi-coke coal water slurry based on multi-peak gradation technology

Influence of Molding Technology on Thermal Efficiencies and Pollutant Emissions from Household Solid Fuel Combustion during Cooking Activities in Chinese Rural Areas

Effects of coal moisture control and coal briquette technology on structure and reactivity of cokes

Biocoal Briquettes Combusted in A Household Cooking Stove: Improved Thermal Efficiencies and Reduced Pollutant Emissions

Effect of Ash Preparation Method on the Sintering Characteristics of Ashes from Combustion of Coal and Biomass Blends

Characterization of coal briquettes using tar as a binding material for use in a coke oven

Bonding Mechanism of Binder and Low-Rank Coal During Carbonization

Study on the Co-combustion Characteristics and Synergistic Effect of Semi-Coke and Dust Coal Produced from Biomass Briquette in Fluidized Bed Gasification

Preparation of formed coke product as a coke substitute using a solid waste fuel: Trimethylbenzene improvement on coal tar pitch

Modeling and optimization of compaction pressure, binder percentage and retention time in the production process of carbonized sawdust-based biofuel briquettes using response surface methodology (RSM)

Characteristics of Biomass Charcoal Briquettes and Pollutant Emission Reduction for Sulfur and Nitrogen During Combustion