Abstract:Production of electrolytic manganese metal inevitably produces a certain amount of solid wasteelectrolytic manganese anode slime, with a high manganese content, but its difficult to recycle due to the presence of other impurities. Firstly, the washing method was used to remove the anode slime soluble salts, then its chemical composition and phase were analyzed. The flame atomic absorption spectrometer and X-ray fluorescence (XRF) analysis showed the anode slime mainly contained Mn, Pb, Ca, Fe, Cr, K, Se and other metal elements, with the average manganese content 45% and the lead 3.5%;X-ray diffraction (XRD) preliminary analysis showed that the anode slime was a colloidal system mainly containing the spinel structure of MnO2 and complex salts PbMn8O16xH2O phase, by high temperature roasting, the anode slime transformed from hexagonal system to cubic system , and the basic structure unit from edges connection to surfaces connection,the change of length,angle and fracture of manganese-oxygen bond provided the channel for the lead leaching;TG-DTA analysis showed that anode slime was dominated by water loss below 400°C,and started to lose oxygen beyond 425°C, and clear endothermic peak was observed at 500°C and 700°C, which showed the anode slime crystal structure changed at 500°C, anode slime weight loss tending to be gentle with some Mn2O3 generation at 700°C, and roasted crystal stabilizing to Mn2O3. Preliminary roasting and leaching purification technology route was proposed according to the above analysis results, and analysis of the purification process related factors was made. Under the condition of natural ventilation, anode slime was roasted at 700°C, and fully leached in 2mol/L HAc , with liquid-solid ratio 10:1, then leached anode slime was characterized by XRD and flame atomic absorption test, the results showed that anode slime manganese content increased from 45% to 67.5%, the lead content decreased from 3.5% to 0.1%, XRD indicated that the anode slime existing phase was Mn2O3. Anode slime after purification treatment can be further used for battery manganese source material, which provides an effective approach for the recovery of manganese anode slime utilization.

Polyacrylonitrile-Based Carbon Fiber As Anode for Manganese Electrowinning: Anode Slime Emission Reduction and Metal Dendrite Control

A Novel Functional Lead-Based Anode for Efficient Lead Dissolution Inhibition and Slime Generation Reduction in Zinc Electrowinning

Ti/Ti4O7 Anodes for Efficient Electrodeposition of Manganese Metal and Anode Slime Generation Reduction

Efficient and clean manganese electrowinning in an anion-exchange membrane electrolyzer by pulse current electrodeposition method

Preparation of PAN-based carbon fiber@MnO 2 composite as an anode material for structural lithium-ion batteries

Preparation of PAN-based carbon fiber@MnO2 composite as an anode material for structural lithium-ion batteries

Modifying the Zn anode with carbon black coating and nanofibrillated cellulose binder: A strategy to realize dendrite-free Zn-MnO2 batteries.

Fe Doped Γ-Mno2 of Anode for Lead Release Inhibition in Zinc Electrowinning

Facile Route to Biomass-Derived 1D Carbon Fiber Supported High-Performance MnO-based Nanocomposite Anode Material

The Process and Mechanism of Electrolytic Manganese Anode Slime Lead Removal

CNFs@MnO2 nanofiber as anode for improving extracellular electron transfer of microbial fuel cells

Bioelectrochemical Performance of Microbial Fuel Cell Powered Electro-Fenton System (mfcⓟefs) with Composite PANI-Mn/CF Anode

Encapsulation of Mno Nanocrystals in Electrospun Carbon Nanofibers As High-Performance Anode Materials for Lithium-Ion Batteries

Polyaniline Anode for Zinc Electrowinning from Sulfate Electrolytes

Enabling a High Performance of Mesoporous Α-Fe2o3 Anodes by Building a Conformal Coating of Cyclized-PAN Network.

In Situ Synthesis of Mn3O4 Nanoparticles on Hollow Carbon Nanofiber As High-Performance Lithium-Ion Battery Anode

Electrodeposition of Manganese Metal and Co-production of Electrolytic Manganese Dioxide Using Single-membrane Double-chamber Electrolysis

2D Carbon-Supported MnO@C Nanoparticles for High Capacity and Long Life Lithium-Ion Battery Anode Enabled by a Relatively Green and Facile Method

Electrochemical Behaviors Of Mno2 On Lead Alloy Anode During Pulse Electrodeposition For Efficient Manganese Electrowinning

Lead release kinetics and film transformation of Pb-MnO2 pre-coated anode in long-term zinc electrowinning

Enhancing extracellular electron transfer efficiency and bioelectricity production by vapor polymerization Poly (3,4-ethylenedioxythiophene)/MnO2 hybrid anode