Abstract:MnO 2 is an attractive material owing to its high specific capacitance, excellent electrochemical activity, thermal and chemical stability, environmental benignity and broad potential window. However, its poor electrical conductivity limits its performance in supercapacitor applications. The electrical conductivity of MnO 2 can be enhanced by making its composites with carbon nanomaterials as these offer superior electrical conductivity and high specific surface area. The present study is a comparative study on the effect of various types of carbon nanomaterials such as carbon nanotubes (CNTs), graphene oxide, thermally reduced graphene oxide, activated carbon and carbon nanofibers on the supercapacitive performance MnO 2 electrodes by making composite electrodes. MnO 2 was synthesized by a facile chemical reduction method, and calcination was performed at 200 °C to obtain amorphous state. MnO 2 -based composite electrodes were prepared using 10 wt.% of various carbon nanomaterials. Characterization of different carbon materials was carried out by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy and atomic force microscopy. Composite electrodes were prepared by coating mixture, consisting of MnO 2 , carbon nanomaterials, carbon black and polyvinylidene fluoride on the surface of highly porous Ni foam using a high-speed vacuum planetary centrifugal mixer. Electrochemical characterization of the prepared electrodes was performed by cyclic voltammetry, galvanostatic charge discharge (GCD) and electrochemical impedance spectroscopy (EIS). GCD revealed that MnO 2 -CNTs composite electrodes showed maximum specific capacitance (SC) of 330 F/g at 1 A/g current density and areal capacitance of 3.16 F/cm 2 with 5–7 mg mass loading of active material in 3 M KOH as an aqueous electrolyte. This SC was ca. 79% higher than pure MnO 2 and also higher than previously reported MnO 2 /CNTs composite electrodes. MnO 2 -CNTs symmetric supercapacitor device showed excellent SC of 177 F/g at 1 A/g current density with 94% charge retention after 1000 GCD cycles. EIS analysis showed that MnO 2 -CNTs composite electrode had the lowest charge transfer resistance compared to other electrodes.

Electrodeposition of Manganese Dioxide under Different Conditions: Application of MnO2/Carbon Fibers in the Electrosorption Process

Preparation of a manganese dioxide/carbon fiber electrode for electrosorptive removal of copper ions from water

Development Of Mno2/Porous Carbon Microspheres With A Partially Graphitic Structure For High Performance Supercapacitor Electrodes

Electrodeposited Manganese Dioxide/Activated Carbon Composite As a High-Performance Electrode Material for Capacitive Deionization

Role of Carbon Nanomaterials on Enhancing the Supercapacitive Performance of Manganese Oxide-Based Composite Electrodes

[Preparation and Pb2 Electrosorption Characteristics of MnO2/CFP Composite Electrode].

Electrodeposition mode effects on the electrochemical performance of MnO2–NiO eco-friendly material for supercapacitor electrode application

Enhancement of the electrocapacitive performance of manganese dioxide by introducing a microporous carbon spheres network

Redox Deposition of Manganese Oxide on Graphite for Supercapacitors

Manganese Oxide Anodized from Manganese Films Electrodeposited at Different Cathodic Currents and Its Capacitive Performance

Manganese Oxide/Mesoporous Carbon Spherical Composite:Study on Its Enhanced Catalytic and Electrochemical Performance

Facile Synthesis and Electrochemical Studies of Mn2O3/Graphene Composite as an Electrode Material for Supercapacitor Application

Preparation of Manganese Dioxide for Electrodes of Supercapacitors Based on Duplex Stainless Steel

Manganese Oxides/SWNTs Composite Films Via Anionic Surfactant-Directed Electrochemical Synthesis

Pseudocapacitive desalination via valence engineering with spindle-like manganese oxide/carbon composites

Effect of Iron Addition on Electrochemical Behavior of Manganese Dioxide

Electrodeposition of Manganese Metal and Co-production of Electrolytic Manganese Dioxide Using Single-membrane Double-chamber Electrolysis

Interfacial Synthesis of Porous Mno2 and Its Application in Electrochemical Capacitor

Electrodeposited Manganese Oxide on Carbon Paper for Zinc‐Ion Battery Cathodes

Layer by Layer Ex-Situ Deposited Cobalt-Manganese Oxide as Composite Electrode Material for Electrochemical Capacitor