Abstract:State-of-the-art soft magnetic (SM) alloy systems such as electrical steels and permalloys exhibit large eddy current losses at high-frequency (kHz range and above), limiting their application in fast switching devices. Eddy current losses can be reduced for metallic alloys through a decrease in characteristic length scale or embedding them in an insulation layer. This work proposes the development of fine-scale core materials consisting of metallic SM nano/microparticles with magnetic, inorganic insulation layers, and their synthesis using a wet chemistry-based, scalable method for high frequency and high-power applications. More specifically, a magnetic ferrite coating (Ni0.5-xMnxZn0.5Fe2O4, x = 0.0–0.5) was applied via deposition of ferrite powder produced using a “wet chemistry-based” co-precipitation method; the ferrite was distributed through the Fe micropowder via either ball milling or ultrasonic mixing. Powder cores were prepared by compaction of the synthesized composites. Relative magnetic permeability and core loss were measured at excitation frequencies to 200 kHz. A core loss of 127 kW/m3 was measured at excitation frequency of 100 kHz and magnetization of 0.02 T. This value improves on the 199.3 kW/m3 reported in literature at identical excitation conditions for a compact formed from a composite comprising Fe microparticles coated with low-permeability Ni0.5Zn0.5Fe2O4. Ultrasonic mixing resulted in slightly lower core loss than ball milling, possibly because ball milling causes loss-increasing deformation of the Fe micropowder. XRD and SEM were used to observe composite composition and core cross-section microstructure.

High-frequency MnZn Soft Magnetic Ferrite by Engineering Grain Boundaries with Multiple-Ion Doping

Two-step Doping of SiO2 and CaO for High-Frequency MnZn Power Ferrites

Correlating the Microstructure with Magnetic Properties of Ti-doped High-Frequency MnZn Ferrite

Grain refinement and high-frequency properties of spark plasma sintered MnZn ferrite

Synergistic Effect of V2O5 and Bi2O3 on the Grain Boundary Structure of High-Frequency NiCuZn Ferrite Ceramics

Effects of magnetic domain morphology on the magnetic spectrum and high‐frequency core losses of MnZn ferrites

Development of High-Temperature High-Permeability MnZn Power Ferrites for MHz Application by Nb2O5 and TiO2 Co-Doping

MHz High Performance of Soft Magnetic Composite with Ordered Domain Structure for Efficient Conversion of Electrical Energy

MnZn power ferrite with high Bs and low core loss

Correlating the microstructure and magnetic properties of MnZn power ferrites via Co2O3 and MoO3 co-doping for MHz applications

Effect of Divalent Metal Ions Substitution on the Magnetic Properties of Ba3Co2-Me Fe24O41 (me = Zn2+, Ni2+) Hexagonal Ferrites

Development of Mn-Zn power ferrite with low losses over a broad temperature range for applications in the high frequency region of 0.5-3 MHz

Microwave Properties and Surface Topography of Soft Magnetic Films with High Resistivity

Magnetic Properties of Manganese-Zinc Soft Ferrite Ceramic for High Frequency Applications

Improving soft magnetic properties of Mn-Zn ferrite by rare earth ions doping

Magnetic and dielectric properties of low‐loss MnZn ferrites with wide temperature stability

Wet chemistry-synthesized Fe/mixed ferrite soft magnetic composites for high-frequency power conversion

Magnetic and Structural Properties of Manganese Zinc Soft Ferrite for High-Frequency Applications

Low power loss manganese ferrites with the addition of Ta2O5 for MHz applications

Superior High-Frequency Performances of Fe-based Soft-Magnetic Nanocrystalline Alloys