Abstract:Most present demonstrations of high-temperature superconducting (HTS) synchronous motors/generators are partially superconducting, only installing HTS coils on the rotor as excitation windings. The possible applicability of HTS armature windings is an interesting research topic because these windings can certainly increase the power density attributed to a potentially high armature loading capacity. In this study, we analysed the thermal behaviours of a developed 2.5 kW–300 rpm synchronous generator prototype that consists of an HTS stator with Bi-2223–Ag armature windings on an iron core and a permanent magnet (PM) rotor. The entire HTS stator, including the iron core, is cooled with liquid nitrogen through conduction cooling. The rated frequency is set at 10 Hz to reduce AC loss. The properties of the HTS windings and the iron core are characterized, and the temperatures in the HTS stator under different operation conditions are measured. The estimated iron loss is 11.5 W under operation in 10 Hz at liquid nitrogen temperature. Conduction cooling through the silicon iron core is sufficient to cool the iron core and to compensate for the temperature increment caused by iron loss. The stable running capacity is limited to 1.6 kW when the armature current is 12.6 A (effective values) due to the increasing temperature in the slots as a result of the AC loss in the HTS coils. The thermal contact between the HTS coils and the cooling media should be improved in the future to take away the heat generated by AC loss.

Design and Testing of Glass-Fiber Reinforced Plastic Components for the Oil-Cooling Air-Core Stator of a High Temperature Superconducting Motor

3D Thermal Analysis of a Permanent Magnet Motor with Cooling Fans

Cooling System Analysis of an Enclosed Yokeless Stator for High-Power Axial Flux PM Motor with Distributed Winding

Temperature Distribution in the Field Coil of a 500-kW HTS AC Homopolar Motor

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Thermal Analysis for the Hts Stator Consisting of Hts Armature Windings and an Iron Core for A 2.5 Kw Hts Generator

Design and Friction Loss Study of Full-Ocean Depth Oil-Filled Direct Current Motor

A Design Study on 20 kW Class Axial Flux Motor with HTS Field Winding for 100 MPa Liquid Hydrogen Pump

Thermal analysis of a fluid immersed brushless DC motor for aerospace applications

Design And Analysis Of A Switched Reluctance Motor With High Temperature Superconducting Windings

Magnetic Conduction Structure Design and Charging Test of a Linear-Motor Type Flux Pump for Through-Dewar Excitation of High Temperature Superconducting Motors

Convective Heat Transfer Characteristics on End-Winding of Stator Immersed Oil-Cooled Electrical Machines for Aerospace Applications

Optimisation and Loss Analyses of Pulsed Field Magnetisation in a Superconducting Motor with Cryocooled Iron Cores

A Pole Pair Segment of Oil-cooling Air-Core Stator for a 2 MW Direct-Drive High Temperature Superconducting Wind Power Generator

Thermal–hydraulic performance optimization of the spiral cooling channel in surface type permanent magnet synchronous motor

Design and testing of CFRP sleeve for a high-speed permanent magnet synchronous motor with surface-mounted rotor

Liquid Hydrogen Cooling System for 100 kW-Class HTS Rotor thermal Design

Thermal Management Integrated with Flat Heat Pipes for In-Slot Stator Windings of Electric Motors

Analysis Of The 3d Steady Temperature Field Of Mw High Speed Permanent Magnet Motor

Design and electromagnetic analysis of oil-cooled structure of new hairpin-winding motors for automobiles

Design and Analysis of a Switched Reluctance Motor with Superconducting Windings and Tapering Poles