Abstract:Poly(3,4 ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is perhaps the most successful polymer material for thermoelectric (TE) applications. So far, treatments by high-boiling solvents, acid or base, or mixing with the carbon nanotube (CNT) are the main ways to improve its TE performance. Herein, we report the synergistically boosting TE properties of PEDOT:PSS/single-walled CNT (SWCNT) composites by the ionic liquid (IL). The composites are prepared by physically mixing the SWCNT dispersion containing the IL with PEDOT:PSS solution and subsequent vacuum filtration. The IL additive has two major functions, that is, inducing the phase separation of PEDOT:PSS and a linear quinoid conformation of PEDOT and promoting the SWCNT dispersion. The maximum power factor at room temperature reaches 182.7 ± 9.2 μW m–1 K–2 (the corresponding electrical conductivity and Seebeck coefficient are 1602.6 ± 103.0 S cm–1 and 33.4 ± 0.4 μV K–1, respectively) for the free-standing flexible film of the PEDOT:PSS/SWCNT composites with the IL, which is much higher than those of the pristine PEDOT:PSS, the IL-free PEDOT:PSS/SWCNT, and the SWCNT films. The high TE performance of composites can be ascribed to synergistic roles of the ion-exchange effect and promotion of SWCNT dispersion by the IL. This work demonstrates the dual roles for the IL in regulating each component of the PEDOT:PSS/SWCNT composite that synergistically boosts the TE performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01059?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01059</a>.Diameter distribution parameters based on Gaussian distribution, optical photographs, water contact angles, SEM–EDS analysis, zoomed comparison of Raman spectra, and XPS general scan analysis (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01059/suppl_file/am1c01059_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Tuning Thermoelectric Performance of Poly(3,4-ethylenedioxythiophene): Poly (styrene Sulfonate)/polyaniline Composite Films by Nanostructure Evolution of Polyaniline

Improving the Thermoelectric Properties of Polyaniline by Introducing Poly(3,4-Ethylenedioxythiophene)

In situ fabricated PEDOT:PSS:PANI with enhanced thermoelectric performance by organic solvent and CSA treatment

Enhanced Thermoelectric Properties of Polyaniline Nanofilms Induced by Self-Assembled Supramolecules.

Large Thermoelectric Power Factor in Polyaniline/graphene Nanocomposite Films Prepared by Solution-Assistant Dispersing Method

Tunable Thermoelectric Properties of Free-Standing PEDOT Nanofiber Film Through Adjusting Its Nanostructure

Roles of Polyethylenimine Ethoxylated in Efficiently Tuning the Thermoelectric Performance of Poly(3,4-ethylenedioxythiophene)-Rich Nanocrystal Films.

An Effective Thermal Treatment Strategy for Thermoelectric Performance Enhancement in PANI/Te Nanorod Hybrid Film

Enhancement of the Thermoelectric Property of Nanostructured Polyaniline/carbon Nanotube Composites by Introducing Pyrrole Unit Onto Polyaniline Backbone Via a Sustainable Method

Recent Advances in Polyaniline-Based Thermoelectric Composites

Constructing Ordered-Structure Organic Thermoelectric Films via Supramolecular Self-Assembly of PEDOT:PSS and Conjugated Triblock Copolymer

Individual Adjustment of Electrical Conductivity and Thermopower Enabled by Multiple Interfaces in Polyaniline‐Based Ternary Hybrid Nanomaterials for High Thermoelectric Performances

Facile preparations of layer-like and honeycomb-like films of poly(3,4-ethylenedioxythiophene)/carbon nanotube composites for thermoelectric application

Preparation and Characterization of Te/Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate)/Cu7Te4 Ternary Composite Films for Flexible Thermoelectric Power Generator

Advancement of Polyaniline/Carbon Nanotubes Based Thermoelectric Composites

Engineered Molecular Chain Ordering in Single-Walled Carbon Nanotubes/Polyaniline Composite Films for High-Performance Organic Thermoelectric Materials.

Construction of Flexible, Self-Supporting, and In-Plane Anisotropic PEDOT:PSS Thermoelectric Films Via the Wet-Winding Approach

Improved Thermoelectric Performance of Free-Standing PEDOT:PSS/Bi2Te3 Films with Low Thermal Conductivity

Synergistically Boosting Thermoelectric Performance of PEDOT:PSS/SWCNT Composites via the Ion-Exchange Effect and Promoting SWCNT Dispersion by the Ionic Liquid

High-Performance Post-Treatment-Free Pedot Based Thermoelectric with the Establishment of Long-Range Ordered Conductive Paths

High Performance Polymer Thermoelectric Composite Achieved by Carbon-Coated Carbon Nanotubes Network