Abstract:Aiming to solve the partial discharge problem caused by defects in composite insulators, most existing live detection methods are limited by the subjectivity of human judgment, the difficulty of effective quantification, and the use of a single detection method. Therefore, a composite insulator defect diagnosis model based on acoustic–electric feature fusion and a multi-scale perception multi-input of stacked auto-encoder (MMSAE) network is proposed in this paper. Initially, during the withstanding voltage experiment, the electromagnetic wave spectrometer and ultrasonic detector were used to collect and process the data of six types of composite insulator samples with artificial defects. The electromagnetic wave spectrum, ultrasonic power spectral density, and n-S map were then obtained. Then, the network architecture of MMSAE was built by integrating a stacked auto-encoder and multi-scale perception module; the feature extraction and fusion methods of the electromagnetic wave spectrum and ultrasonic signal were investigated. The proposed method was used to diagnose test samples, and the diagnostic results were compared to those obtained using a single input source and the artificial neural network (ANN) method. The results demonstrate that the detection accuracy of acoustic–electric feature fusion is greater than that of a single feature; the accuracy of the proposed method is 99.17%, which is significantly higher than the accuracy of the conventional ANN method. Finally, composite insulator defect diagnosis software based on PYQT5 and Keras was developed. Ten 500 kV aging composite insulators were used to validate the effectiveness of the proposed method and design software.

Defect Detection for Composite Insulators Based on Electromagnetic Wave Spectrum and Field Application

Feasibility Research of Defect Testing for Basin Insulator Based on Ultrasonic Guided Wave

Feasibility of non-destructive testing for aluminium sheaths of HV cables using ultrasonic guided waves

Detection of Internal Defects of Full-Size Composite Insulators Based on Microwave Technique

Detection of Small Defects in Composite Insulators Using Terahertz Technique and Deconvolution Method

Microwave-based Detection of Internal Defects in Composite Insulators for Outdoor Application

Composite Insulator Defect Identification Method Based on Acoustic–Electric Feature Fusion and MMSAE Network

Microwave Reflection Method for Composite Insulator Internal Defect Detection

Study on the nondestructive detection method of composite insulator internal defect based on microwave reflection

Microwave Detection Technology for Internal Defects of Composite Post Insulators

Finite Element Simulation Analysis of Infrared Thermal Wave Detection on Composite Insulators

Study on Detection of Insulator Defects in Time Domain Terahertz Wave

Non-Destructive Testing of Internal Defects in Composite Insulators Using Microwave Technique

Pulsed Infrared Thermography to Inspect the Internal Defects of Composite Insulators

Evaluation of the UHF Method Based on the Investigation of a Partial Discharge Case in Post Insulators

Electric field distribution characteristics of composite insulator with internal defect

Diagnostics of Internal Defects in Composite Overhead Insulators Using an Optic E-Field Sensor

Transient thermal pattern separation and detection of conductive defects in composite insulators using eddy current pulsed thermography

Microwave-based Non-destructive Testing Method on Composite Insulators

Eddy Current Thermography for the Detection of Conductive Defects in Composite Insulators

Partial Discharge Detection and Defect Location Method in GIS Cable Terminal