Research on optimal design of needle-shaped tower grounding device using thin-shell theory
Li, Jingli,Liu, Luyao,Zhu, Zizhuo,Li, Chuanju
DOI: https://doi.org/10.1007/s00202-023-02153-2
IF: 1.63
2024-01-15
Electrical Engineering
Abstract:The impulse grounding impedance of the tower grounding device affects the lightning trip-out rate of the transmission line. It is necessary to optimize the design of the grounding device for impedance reduction. In this paper, a finite element model for the impulse property of the grounding device is established. The thin-shell theory is introduced to solve the problem of mesh division singularity caused by excessive dimensional differences between the conductor sectional area and soil dispersion area. Physical quantities such as potential, electric field strength, and current density of tower grounding devices were analyzed, and the impedance reduction mechanism of the needle-shaped grounding device was obtained. A simulation study of the needle-shaped tower grounding device was carried out to obtain the effects of five factors related to the needling: position, number, distance, length, and angle on the impulse grounding impedance, as well as their optimal values. The results show that adding the needling at the end of a star grounding electrode branch can effectively reduce the impulse grounding resistance. The number of needling is not the more the better, and the unit length utilization is maximum when 2 needles are used. Changes in the length of the needling have a greater impact on the impulse grounding resistance relative to changes in spacing. When the spacing between the two needles is 2 m and the length is 5 m, it is appropriate to set the angle in the range of 30°–60°. The optimized design of the tower grounding device can effectively reduce the impulse grounding impedance.
engineering, electrical & electronic