Abstract:Bubble aeration has been widely applied in water/wastewater treatment, however its low gas utilization rate results in high energy consumption. Application of micro-nanobubbles (MNB) has emerged as a process with the potential to significantly increase gas utilisation due to their high relative surface area and high gas-liquid mass transfer efficiency. In this study, we demonstrate through calibrated models that MNB of an optimum bubble size can shrink and burst at or below the water surface enabling (1) all encapsulated gas to thoroughly dissolve in water, and (2) the bursting of nanobubbles to potentially generate free radicals. Through the understanding of MNB dimensional characteristics and bubble behaviour in water, a dynamic model that integrated force balance (i.e. buoyancy force, gravity, drag force, Basset force and virtual mass force), and mass transfer was developed to describe the rising velocity and radius variation of MNB along its upward trajectory. Unlike for conventional millimetre-sized bubbles, intensive gas dissolution of MNBs led to radius reduction for small bubbles, while a large initial radius triggers bubble swelling. The initial water depth was also crucial, where greater depth could drive the potential for bubble shrinkage so that they were more liable to contract. For example, the optimum bubble size of air (42–194 μm) and oxygen (127–470 μm) MNB that could achieve complete gas transfer (100% gas utilisation) for a range of specific water depths (0.5–10 m) were calculated. The modelling results for microbubbles (10–530 μm) were well validated by the experimental data (R 2 >0.85). However, the validation of the modelling results for nanobubble (<1 μm) aeration requires further study due to a lack of available empirical data. In this study, the proposed model and analysis provided new insights into understanding bubble dynamics in water and offered fundamental guidance for practitioners looking to upgrade bubble aeration system.

Modeling and Validation of the Momentum Force for Bubble Formation from Submerged Orifices with an Oscillatory Air Supply

Numerical Simulations and Experimental Validation on Passive Acoustic Emissions During Bubble Formation

Bubble Formation in a Swirl-Venturi Microbubble Generator

Bubble breakup in a swirl-venturi microbubble generator

Numerical Simulations of Bubble Formation and Acoustic Characteristics from a Submerged Orifice: the Effects of Nozzle Wall Configurations

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

Theoretical Model for Predicting Bubble Formation from Submerged Orifices

A modelling approach to explore the optimum bubble size for micro-nanobubble aeration

Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

Numerical Simulation Of Bubbly Flow Using Partially Averaged Navier-Stokes Simulation And A Path Oscillation Model In The Euler-Lagrange Approach

Three-Dimensional Numerical Simulation of Air Exhausted from Submerged Nozzles

Fundamental Numerical Simulation of Microbubble Interaction Using Multi-scale Multiphase Flow Equation

Asymmetric Bubble Formation at Rectangular Orifices

Experimental and Numerical Study on the Formation and Detachment of Bubbles at Orifices under the Impinging Jet Flow

Effect of Contact Angle on Bubble Formation at Submerged Orifices

Numerical simulation of single bubble motion fragmentation mechanism in Venturi-type bubble generator

The Formation of a Bubble from a Submerged Orifice

Dynamic behaviors of bubble formation on submerged micro-capillary under constant flow conditions

Shape Oscillation-Induced Early Detachment of Bubble from a Submerged Microcapillary Nozzle

Role of Bubble Evolution in the Bubble-Propelled Janus Micromotors