Abstract:Polyaniline (PANI), as one of the most promising electrode materials for flexible supercapacitors, facing the problems of limited capacitive properties and poor cycling stability. Herein, we demonstrate that dopants have a great effect on the electrochemical performance of PANI and selecting a suitable dopant can be used as an effective way for enhancing the electrochemical behavior of PANI electrode. All PANI electrodes were synthesized by electropolymerization method using hydrochloric acid (HCl), perchloric acid (HClO4), sulfuric acid (H2SO4), p-toluenesulfonic acid (p-TSA), phosphoric acid (H3PO4) and phytic acid (PA) as dopants, respectively. The influence of dopants on morphology, doping level, redox sites accessibility and electrochemical performance of PANI electrodes were studied systematically. The results show that, PANI/HClO4 has the best capacitive behavior with a maximum specific capacity of 1341 C g−1 at 5 mV s−1 along with a 57 % capacity retention after 2000 cycles. Moreover, PANI/p-TSA shows the best cycling stability with 70% of capacity retention after 2000 cycles accompanied with a relatively high specific capacity (722 C g−1 at 5 mV s−1). Furthermore, PANI/HClO4 and PANI/p-TSA were used as electrodes for the fabrication of flexible all-solid-state symmetric supercapacitors. Results indicate that PANI/HClO4 device has higher energy density (12.57 Wh kg−1 at 283 W kg−1) than that of PANI/p-TSA (8.86 Wh kg−1 at 199 W kg−1). In contrast, PANI/p-TSA device with a capacity retention over 80% after 3000 cycles has better stability than PANI/HClO4 device which maintain 73% capacity after 3000 cycles. This fundamental study provides a much easier route in achieving high performance flexible PANI-based electrodes and opens new opportunities for facilitating PANI-based electrodes as promising candidates for wearable electronics.

Interfacial Growth of Free-Standing PANI Films: Toward High-Performance All-Polymer Supercapacitors

Construction of Hierarchical 2D PANI/Ni3S2 Nanosheet Arrays on Ni Foam for High-Performance Asymmetric Supercapacitors

Construction of Hierarchical 2D PANI/Ni<sub>3</sub>S<sub>2</sub> Nanosheet Arrays on Ni Foam for High-Performance Asymmetric Supercapacitors

Three-dimensional Carbon Nanotube/ethylvinylacetate/polyaniline As a High Performance Electrode for Supercapacitors

In-situ Electropolymerization of Porous Conducting Polyaniline Fibrous Network for Solid-State Supercapacitor

Promoting Oriented Growth of a Polyaniline Array on Carbon Cloth through in Situ Chemical Polymerization under a High Voltage Electric Field for a Flexible Supercapacitor with High Areal Capacity and Stability

Three-dimensional bicontinuous nanoporous Au/polyaniline hybrid films for high-performance electrochemical supercapacitors

Flexible and freestanding PANI: PSS/CNF nanopaper electrodes with enhanced electrochemical performance for supercapacitors

Boosting the Utilization and Electrochemical Performances of Polyaniline by Forming a Binder-Free Nanoscale Coaxially Coated Polyaniline/Carbon Nanotube/Carbon Fiber Paper Hierarchical 3D Microstructure Composite as a Supercapacitor Electrode

Growth of polyaniline nanowhiskers on mesoporous carbon for supercapacitor application

Highly Specific Capacitance Materials Constructed Via in Situ Synthesis of Polyaniline in a Cellulose Matrix for Supercapacitors

Interfacial synthesis of crystalline quasi-two-dimensional polyaniline thin films for high-performance flexible on-chip micro-supercapacitors

Preparation of morphology-controllable polyaniline and polyaniline/ graphene hydrogels for high performance binder-free supercapacitor electrodes

3D Conductive Network-Based Free-Standing PANI–RGO–MWNTs Hybrid Film for High-Performance Flexible Supercapacitor

Fabrication of Coral-like Polyaniline/Continuously Reinforced Carbon Nanotube Woven Composite Films for Flexible High-Stability Supercapacitor Electrodes

Unique Core-Shell Structured Polyaniline Nanofibers Toward Ultrahigh-Rate Flexible All-Solid-State Supercapacitor

Vapor deposition polymerization of aniline on 3D hierarchical porous carbon with enhanced cycling stability as supercapacitor electrode

Polyaniline combining with ultrathin manganese dioxide nanosheets on carbon nanofibers as effective binder-free supercapacitor electrode

Construction of tunable ZnCoO x /C-PANI electrode materials for high-performance supercapacitors

Electropolymerization of polyaniline as high-performance binder free electrodes for flexible supercapacitor

Fabrication of PANI@Ti3C2Tx/PVA hydrogel composite as flexible supercapacitor electrode with good electrochemical performance