Abstract:With the aim to investigate the effect of parameters and the quenching process on the joint microstructure and mechanical properties of hot stamping steel by laser welding, BR1500HS boron steel was welded by wire-filling laser welding with ER70-G welding wire under different parameters. The welded specimens were heated to 900 °C and held for 5 min before water quenching. A universal material test machine, optical microscope, Vickers hardness tester, scanning electron microscope, and electron backscatter diffraction (EBSD) were used to characterize. The results show that the heat input should be greater than 1040 J/cm and the optimal wire-feeding speed is between 160 cm/min and 180 cm/min. The tensile strength of the quenched joint can reach greater than 1601.9 MPa at compatible parameters. More retained austenite distributes in the fusion zone (FZ) and fine grain zone (FGZ) than the coarse grain zone (CGZ) before quenching. However, the retained austenite in FZ and heat-affected zone (HAZ) decreases clearly and distributes uniformly after quenching. The grain diameter in FZ before quenching is not uniform and there are some coarse grains with the diameter greater than 40 μm. After quenching, the grains are refined and grain diameter is more uniform in the joint. With the increase in heat input, the microhardness of FZ and HAZ before quenching decreases from 500 HV to 450 HV. However, if the wire-feeding speed increases, the microhardness of FZ and HAZ before quenching increases from 450 HV to 500 HV. After quenching, the joint microhardness of all samples is between 450 HV and 550 HV. The fracture morphology of the joint before quenching consists of a large number of dimples and little river patterns. After quenching, the fracture morphology consists of a large amount of river patterns and cleavage facets due to the generation of martensite.

Building automatic welding process using a high-performance steel submerged q460gjc

Research on the Welding Process and Weld Formation in Multiple Solid-Flux Cored Wires Arc Hybrid Welding Process for Q960E Ultrahigh-Strength Steel

Experimental and Simulation Study on Welding Characteristics and Parameters of Gas Metal Arc Welding for Q345qD Thick-Plate Steel

Development of weld filler material to match the advanced martensitic heat resistance steel G115 and tailoring the performance by tempering temperature

AUTOMATIC WELDING TECHNOLOGY AND EQUIPMENT OF TRANSVERSE GIRTH SEAM FOR METALLURGICAL BLAST-FURNACE BODY

Experimental Investigation of Integrated Circular Triple-Wire Pulse GMAW of Q960E High-Strength Steel for Construction Machinery

Rotating arc horizontal narrow gap welding of high strength quenched and tempered steel

Prediction of HAZ Microstructure and Hardness for Q960E Joints Welded by Triple-Wire GMAW Based on Thermal and Numerical Simulation

Effect of Heat Input on Microstructure and Performance of Welded Joint in 1 000 MPa Grade Steel for Construction Machinery

Microstructure and Mechanical Properties of Underwater Wet Welded High Carbon-Equivalent Steel Q460 Using Austenitic Consumables

Microstructure and mechanical properties of HSLA thick plates welded by novel double-sided gas metal arc welding

Evaluation on Microstructure and Mechanical Properties of High-Strength Low-Alloy Steel Joints with Oscillating Arc Narrow Gap GMA Welding

Research Status of Weldability of Advanced Steel

Achieving Equal Strength Joint to Parent Metal in a Friction Stir Welded Ultra-High Strength Quenching and Partitioning Steel

Development And Application Of Multicycle Quenching-Partitioning-Tempering Process

Dissimilar steel welding method of 15 Cr1Mo1V valve body and WB 36 piping

Study on Improvement of Welding Technology and Toughening Mechanism of Zr on Weld Metal of Q960 Steel

Study on the Structure and Property of the Low Carbon Steel Part Based on the Rapid Prototyping Technique of Welding

Quenching-Partitioning-Tempering Process and Its Engineering Feasibility of 900 MPa Grade Hot-Rolled Plate

Comparison of feasibility, microstructure and performance of hybrid laser arc, activated flux tungsten inert gas and friction stir welding for thick plate of innovative ultra-pure ferritic stainless steel

Research on Parameters of Wire-Filling Laser Welding and Quenching Process for Joints Microstructure and Mechanical Property of BR1500HS Steel