Abstract:Summary Batch transportation of oil and water is a new transportation method in oil and gas gathering and transportation pipelines. Its corrosion inhibition effect has been preliminarily verified in a horizontal pipe experiment. However, achieving overall visualization in traditional loops is difficult, resulting in limited flow pattern classification and analysis of influencing factors. Combining the advantages of the traditional flow loop and the wheel flow loop, we introduce in this paper a round-head straight pipe loop and analyze the influence of key factors on the evolution of the flow pattern of the oil-water interface and the dimensionless length of the oil-water film (L~o, L~w) on the pipe wall through computational fluid dynamics (CFD) numerical simulation. The results show that the batch transportation of oil and water using the round-head straight pipe loop is more in line with the flow characteristics of oil and water two-phase flow in gathering pipelines. Three distinct three-layered flow patterns were identified, which are Flow Pattern I (oil-in-water in the upper layer, annular flow in the middle layer, and oil as the annular phase, water as the core phase, and oil-in-water in the lower layer, abbreviated as DW/O-AN-DW/O), Flow Pattern II (oil phase in the upper layer, annular flow in the middle layer, water as the annular phase, oil as the core phase, and oil in the lower layer, abbreviated as O-AN-O), and Flow Pattern III (oil phase in the upper layer, water-in-oil dispersion flow in the middle layer, and oil in the lower layer, abbreviated as O-DO/W-O). Additionally, parametric analysis reveals that the velocity of the rigid body (ν) has the greatest influence on the coverage rate of the oil film on the pipe wall, followed by the viscosity of crude oil. The density of crude oil has the least influence. The round-head straight pipe loop model offers an accurate simulation of the process of oil and water batch transportation in actual production pipelines. Therefore, the corrosion mitigation efficiency increases with the increase in oil viscosity when the viscosity of the oil lies within the range of 0.01–1 Pa·s. This increase is due to the formation of a more stable oil film on the pipe wall at higher viscosities. When the speed of the rigid body ranges from 0.5 to 1 m/s, due to the small fluid velocity, the erosion effect on the oil film on the pipe wall is relatively small, and the corrosion mitigation efficiency remains stable within a wide range.

Experimental Study for High-Viscosity-ratio Oil-Water Two-Phase Flow in Inclined Pipes

Oil-Water Two-Phase Flow with Three Different Crude Oils: Flow Structure, Droplet Size and Viscosity

Experimental Investigation of Oil-Water Two-Phase Flow in Horizontal, Inclined, and Vertical Large-Diameter Pipes: Determination of Flow Patterns, Holdup, and Pressure Drop

Experimental investigation of high-viscosity oil–water flow in vertical pipes: flow patterns and pressure gradient

Experimental Investigation of Interfacial Wave in Stratified Low-Viscosity-oil and Water Flow in Horizontal and Upward Pipes

Experimental investigation of oil–water flow in the horizontal and vertical sections of a continuous transportation pipe

Study on the Flow Characteristics of Heavy Oil-Water Two-Phase Flow in the Horizontal Pipeline

Experimental study of horizontal two- and three-phase flow characteristics at low to medium liquid loading conditions

Oil-water two-phase flow measurement based on differential pressure

An experimental study on pressure drop of air-oil flow in horizontal pipes using two synthetic oils

Study on Flow Pattern Maps in Hilly-Terrain Air–water–oil Three-Phase Flows

Experimental investigation on flow patterns and pressure gradients of shale oil-water flow in a horizontal pipe

Computational Fluid Dynamics Simulation of Oil-Water Batch Transport in a Pumpless Virtual Flow Loop

Relationship between fluctuating differential pressure and void fraction of gas-liquid two-phase flow in Venturi tube

Experimental Study on Gas-Liquid Two-Phase Stratified Flow at High Pressure in a Horizontal Pipe

Flow Characteristics of Oil-Carrying by Water in Downward-Inclined and Horizontal Mobile Pipeline

Research on Oil–Water Two-Phase Flow Patterns in Wellbore of Heavy Oil Wells with Medium-High Water Cut

Experimental and Theoretical Study of Interface Characteristics of Gas–Liquid Stratified Flow in Horizontal Pipe at High Pressure

The Flow Pattern Transition and Water Holdup of Gas–Liquid Flow in the Horizontal and Vertical Sections of a Continuous Transportation Pipe

Investigation of flow characteristics and eddy viscosity ratio for air-oil intermittent flow in horizontal pipe

Investigation of Oil-Air Two-Phase Mass Flow Rate Measurement Using Venturi and Void Fraction Sensor