Validation and analysis of fluid-structure interaction between rotary harrow weeding roll and paddy soil

Qi Long,Liang Zhongwei,Ma Xu,Tan Yongxin,Jiang Likai
DOI: https://doi.org/10.3969/j.issn.1002-6819.2015.05.005
2015-01-01
Abstract:In order to investigate the variance of the resistance on the weeding roll and the dynamic behavior of the paddy soil in the condition of paddy field, LS-DYNA, the explicit analysis module of ANSYS, was adopted to simulate and analyze the operating process of the rotary harrow weeding roll in this paper. The soil model was built by MAT147 in LS-DYNA, an elastic-plastic model using the Mohr-Coulomb yield criterion. In order to simulate the paddy field in reality when weeding, a soil-water combined model was established using the Multi-Material ALE(Arbitrary Lagrange-Euler) algorithm, which was considered to be an ALE finite element model. By using the Multi-Material ALE algorithm, the different materials were allowed to exchange and transport in the ALE mesh. The interaction process between the weeding roll and the soil-water model was analyzed by the Fluid-Structure Interaction algorithm. Type of soil (factor A), thickness of water layer (factor B) and rotary velocity of weeding roll (factor C) were selected as three factors of the orthogonal simulation experiment with reciprocal action to explore the effect regularity on coupling stress and destruction of soil caused by the factors and the primary reciprocal actions between each factor. The comprehensive evaluation of simulations results were carried out by the multi-objective optimization design method. The results show that in three types of soils the optimal performance of the weeding roll could be obtained when the water layer thickness was 60 mm and the weeding roll rotary velocity was 160 r/min. The sequence of factors in affecting the coupling stress was type of soil > thickness of water layer > type of soil × thickness of water layer > type of soil × rotary velocity of weeding roll > rotary velocity of weeding roll > thickness of water layer × rotary velocity of weeding roll. The coupling stress was reported to be the minimal in the condition of clay soil, and the maximal in the condition of sandy clay soil. The coupling stress was reported to decrease slightly with the increasing thickness of water layer, and increase first and then decrease within a narrow range with the increasing rotary velocity of weeding roll. The sequence of factors in affecting the destruction of soil was type of soil > rotary velocity of weeding roll > type of soil × thickness of water layer > type of soil ×rotary velocity of weeding roll > thickness of water layer > thickness of water layer × rotary velocity of weeding roll. The destruction of soil was reported to be the minimal in the condition of clay soil, and the maximal in the condition of sandy clay soil. The destruction of soil was reported to drop slightly first and then rise with the increasing thickness of water layer, and increase with the increasing rotary velocity of weeding roll. The field trail and the soil box test were carried out to validate the simulation results. The deviation between the torsion derived from the coupling stress and the one obtained from the field trail was 8.84%, and the deviation between the destruction of soil obtained from the simulation and the one from soil box test was 9.86%, and the deviation between the score of the comprehensive evaluation obtained from the simulation and the one from experiments was 7.02%. The results of field trail and soil box test are basically coordinated with the simulation, which prove the methods of modeling and simulation adopted in this research. The results provide references to the performance and the efficacy of the portable paddy field weeder operating in different rice growing districts and working conditions with different working parameters.
What problem does this paper attempt to address?