Abstract:The rotary tillage knife roller, as one of the typical soil-touching parts of the tillage equipment cutting process, is in direct contact with the soil. During the cutting process, there are problems related to structural bending, deformation, and high power consumption, caused by impact and load, and it is difficult to observe the micro-change law of the rotary tillage tool and soil. In view of the above problems, we took the soil of the cotton experimental field in Shihezi, Xinjiang, and the soil-contacting parts of the rotary tillage equipment, specifically the rotary tiller roller, as the research subject. Using the finite-element method (FEM) to simulate the structure of the rotary tiller with different bending angle parameters, we obtained its average stress and deformation position information, and obtained a range linear relationship between the bending angle and the structural performance of the rotary tiller tool. Using discrete element method (DEM)-based simulation to build the corresponding contact model, soil particle model, and soil–rotary tillage knife roll interaction model to simulate the dynamic process of a rotary tillage knife roll cutting soil, we obtained the change rules of the soil deformation area, cutting process energy, cutting resistance, and soil particle movement. By using the orthogonal simulation test and the response surface method, we optimized the kinematic parameters of the rotary tiller roller and the key design parameters of a single rotary tiller. Taking the reduction of cutting power consumption as the optimization goal and considering the influence of the bending angle on its structural performance, the optimal parameter combination was obtained as follows: the forward speed was 900 m/h, the rotation speed was 100 rad/min, the bending angle was 115°, and the minimum power consumption of the cutter roller was 0.181 kW. The corresponding average stress and deformation were 0.983 mm and 41.826 MPa, which were 15.8%, 13%, and 7.9% lower than the simulation results of power consumption, stress, and deformation under the initial parameter setting, respectively. Finally, the effectiveness of the simulation optimization model in reducing power consumption and the accuracy of the soil-cutting simulation were verified by a rotary tilling inter-field test, which provided theoretical reference and technical support for the design and optimization of other typical soil-touching parts of tillage and related equipment, such as disc harrow, ploughshare, and sub-soiling shovel.

Analysis of Adhesion between Wet Clay Soil and Rotary Tillage Part in Paddy Field Based on Discrete Element Method

Simulation of Front End Loader Bucket–soil Interaction Using Discrete Element Method

Investigation on tillage resistance and soil disturbance in wet adhesive soil using discrete element method with three-layer soil-plough coupling model

Estimation of Soil Shear Strength Indicators Using Soil Physical Properties of Paddy Soils in the Plastic State

DEM parameters of slope cultivated purple soil in Southwest China and interaction mechanism between very narrow tine

Calibrating contact parameters of typical rotary tillage components cutting soil based on different simulation methods

Three-dimensional discrete element modelling of tillage: Determination of a suitable contact model and parameters for a cohesionless soil

THE EFFECTS OF MULTIPLE PARAMETERS ON INITIAL APPARENT VISCOSITY AND RHEOLOGICAL BEHAVIOR IN A LIQUID-PHASE PADDY FIELD

Prediction of cutting forces and soil behavior with discrete element simulation

Three-dimensional discrete element modelling (DEM) of tillage: Accounting for soil cohesion and adhesion

Experimental Study on the Correlation Between Shear Characteristic and Physical Parameters of Paddy Soil in Plastic State

A ROTARY BLADE DESIGN FOR PADDY FIELDS WITH LONG RICE STRAW BASED ON EDEM

Quantification of the Soil Stiffness Constants Using Physical Properties of Paddy Soils in Yangtze Delta Plain, China

Estimating Soil Penetration Resistance of Paddy Soils in the Plastic State Using Physical Properties

A Comprehensive Study on the Mechanical Properties of Bulldozing Plate Soil Engaging Surface Based on the Entropy-Weighted Grey Relational Analysis Method.

Parameter calibration of the discrete element simulation model for soaking paddy loam soil based on the slump test

Discrete element modelling of tillage forces and soil movement of a one-third scale mouldboard plough

CALIBRATION OF SOIL DISCRETE ELEMENT CONTACT PARAMETER IN RHIZOME MEDICINAL MATERIALS PLANTING AREA IN HILLY REGION

Simulation of Soil Cutting and Power Consumption Optimization of a Typical Rotary Tillage Soil Blade

DEM Parameter Calibration of Maize Seeds and the Effect of Rolling Friction

Determination of discrete element model parameters for a cohesive soil and validation through narrow point opener performance analysis