Abstract:Cyclic loading is encountered in several practical geotechnical problems. Understanding and modeling cyclic soil responses are key to engineering analysis and design. As one of the most distinct features of soils, fabric anisotropy plays an essential role in the soil response to cyclic loading, such as pore-pressure development dependent on the interplay between fabric and loading direction, effective stress path inclination related to initial fabric, and stiffness variation associated with bedding-plane orientation. However, most previous clay models developed within the bounding surface framework use the rotational angle, a stress-ratio-type scalar, to describe fabric anisotropy and its evolution, which fails to comprehensively capture the anisotropic responses. In this study, a deviatoric fabric tensor, instead of the commonly used rotational angle, was used to describe the internal microstructure within the framework of anisotropic critical state theory. A scalar-valued anisotropic fabric variable quantifying the interplay between the fabric tensor and loading direction was used to account for the impact of anisotropy on both dilatancy and strength, aimed at simulating the typical 'butterfly-shaped' stress loops, and varying rates of stiffness degradation and pore-pressure accumulation of samples with different bedding-plane directions. The initial fabric tensor was also introduced into the elastic expression to replicate the inclined undrained stress paths, as well as the variational degree and direction of inclinations due to different bedding-plane orientations. The predictive capability of the proposed model was demonstrated by simulating three typical clays in undrained and drained conditions, with varying stress and strain amplitudes. The model can capture the major influences from the initial fabric anisotropy and its evolution of clay, i.e., the typical 'butterfly-shaped' stress loops and the bedding-plane direction-dependent effective stress path, the pore-pressure generation, stiffness variation, and strain accumulation.

Simplified nonlinear model considering cyclic degradation of saturated clay

A Strength Degradation Model of Saturated Soft Clay and Its Application in Caisson Breakwater

Bounding Surface Plasticity Model for Clay under Cyclic Loading Conditions Considering Fabric Anisotropy

An Anisotropic Egg-Shaped Bounding Surface Model for Saturated Soft Clay

Cyclic accumulative deformation of sand and its explicit model

Numerical analysis of axial cyclic degradation of a single pile in saturated soft soil based on nonlinear kinematic hardening constitutive model

Simplified Modelling of Full-Strain-range Non-Linearity of Cyclically Loaded Undrained Clays

Undrained cyclic shear strength and stiffness degradation of overconsolidated soft marine clay in simple shear tests

Strain Degradation Model for Anisotropic Soft Clay under Cyclic Loading

Strain Degradation of Saturated Clay under Cyclic Loading

A Simple Bounding Surface Elasto-Viscoplasticity Model for Marine Clays under Monotonic and Cyclic Loading

STUDY ON ACCUMULATIVE PLASTIC STRAIN MODEL OF SOFT CLAY UNDER CYCLIC LOADING

Dynamic modulus degradation for soft saturated clay under coupling stress paths of cyclic deviatoric stress and cyclic confining pressure

A Bounding-Surface-based Cyclic "P-Y Plus M-θ" Model for Unified Description of Laterally Loaded Piles with Different Failure Modes in Clay

Study on Dynamic Stress-Strain Relationship of Soft Clay Based on Modified Iwan's Model under Undrained Cyclic Loading

STUDY ON STRAIN SOFTENING IN SATURATED SOFT CLAY UNDER CYCLIC LOADING

Experimental Study on Degradation of Stiffness of Saturated Soft Clay under Undrained Cyclic Loading

Energy-based Evaluation of Undrained Cyclic Behavior of Marine Soft Clay under Multidirectional Simple Shear Stress Paths

Modeling Of Stress-Strain Behavior Of Soft Clay Under Cyclic Loading

Constitutive Modelling of the Shakedown Response of Sensitive Clay to Undrained Long-Term Cyclic Loads Incorporating Structural Destruction

Degradation of Stiffness and Strength of Offshore Saturated Soft Clay under Long-Term Cyclic Loading