Abstract:Cracks affect the strength of rock masses and eventually threaten their stability in engineering. In order to study the fracture characteristics and mechanical properties of cracked rocks, uniaxial compression tests of pre-cracked granite samples with a central circular through hole were carried out by using MTS816 rock mechanics testing system. The inclination angles of different pre-cracks are 0°, 15°, 30°, 45°, 60°, 75°, and 90° respectively, and the influence of the crack stop hole near the crack tip on the failure behavior of pre-cracked samples is also considered. The results indicate that, compared with the intact sample, the peak strength of pre-cracked samples decreases significantly and is related to the pre-crack inclination angle. The failure mode of the sample varies with the pre-crack inclination angle, and the crack stop hole near the crack tip also has a certain influence on the crack growth to a certain extent. However, in terms of failure mode and its transformation law, the influence of central circular through hole and crack stop hole can be ignored. Generally speaking, the larger the inclination angle of the pre-crack, the more the total energy required for failure of the sample, and the more the stored elastic strain energy. Before the peak strength, the elastic strain energy of the sample is greater than the dissipated energy, after the peak strength, the dissipated energy gradually exceeds the elastic strain energy due to energy conversion. It is found that the pre-crack reduces the energy storage capacity of the sample, and the total energy is ultimately dominated by sample integrity. The dissipated energy rate increases first, then decreases, and finally increases again, the inflection points are the end of micro-crack closure and the peak strength, respectively. The crack stop hole changes the law of energy evolution to a certain extent, which can improve the ability of rocks to accumulate energy when designed at an appropriate position, so as to improve its load-bearing capacity in a certain range. The results display the mechanical properties of pre-cracked granite samples under uniaxial compression and are conducive to its application in engineering.

Evolution of Permeability of Granite with Tensile and Compressive-Shear Cracks

INVESTIGATION ON DAMAGE EVOLUTION CHARACTERISTIC OF GRANITE UNDER COMPRESSIVE STRESS CONDITION AND ITS IMPACT ON PERMEABILITY

Permeability Evolution of Thermally Cracked Granite with Different Grain Sizes

Experimental Investigation on Permeability Evolution of Granite Samples Containing a Grout Infilled Fracture under Triaxial Compression

Quantitative investigation of crack propagation and fracture mechanism of fissured granite from the mesoscopic perspective

Modeling Crack Propagation in Heterogeneous Granite Using Grain-Based Phase Field Method

Permeability evolution of grout infilled fractures subjected to triaxial compression with low confining pressure

Experimental Study on Mechanical Properties and Failure Laws of Granite with Artificial Flaws under Coupled Static and Dynamic Loads

Damage Characteristics of Granite Under Hydraulic and Cyclic Loading–Unloading Coupling Condition

PERMEABILITY OF DENSE ROCK UNDER TRIAXIAL COMPRESSION

Cracking Behavior and Acoustic Emission Characteristics of Heterogeneous Granite with Double Pre-Existing Filled Flaws and a Circular Hole under Uniaxial Compression: Insights from Grain-Based Discrete Element Method Modeling

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Strength Characteristics and Failure Mechanism of Granite with Cross Cracks at Different Angles Based on DIC Method

Macro- and Microstructural Characteristics of the Tension–Shear and Compression–Shear Fracture of Granite

Seepage Analysis of Orthogonal Shear Cracks in Granite Based on Fractal Theory

Evolutionary Analysis of Heterogeneous Granite Microcracks Based on Digital Image Processing in Grain-Block Model

Study on the characteristics of granite rock impact crack based on grain-based model

Microcrack Growth Properties of Granite under Ultrasonic High-Frequency Excitation

Study on the Constitutive Model and the Identification of Parameters of Granite Based on the Crack Closure Ratio

Failure characteristics and the law of the energy evolution of granite with different pre-crack inclination angles under uniaxial compression loading

Experimental research on the mechanical properties and energy transfer of fractured granite under triaxial loading