Abstract:Abstract Cone penetration test (CPT) is regularly used during offshore site investigations to interpret soil stratification and soil characteristics due to its continuous penetration resistance profile. However, its use could be improved if better numerical methods to simulate its penetration could be developed. Finite element (FE) analysis, for instance, has the potential to provide insightful information on soil response and soil flow mechanisms. However, it is challenging to simulate CPT in layered soils, as the soil experiences extremely large strains around the cone and the simulation costs are high. In this study, the efficiency of using a partial large deformation FE (LDFE) approach was explored to examine the pre-embedment depth allowed for saving LDFE analysis cost. The LDFE analysis was conducted using the remeshing and interpolation technical with small strain (RITSS) method to model the large strain problem. Both soft-stiff-soft clays and clay-sand-clay soil were considered to study the thin stiff layer effect when it was sandwiched in soft clay. The LDFE/RITSS analysis compared a CPT penetrating from the soil surface with penetrations from a pre-embedded depth above the stiff layer. Pre-embedded small strain analysis was also conducted for comparison. The results show that the small strain analysis underestimated the resistance in both clay and sand. For the partial LDFE analysis with pre-embedment in the top clay layer, the CPT response in the middle stiff clay layer could be well captured regardless of the initial pre-embedment depth. However, for the middle medium dense sand layer (ID = 60%), the pre-embedment depth needs to have sufficient distance above it (10D, D is cone diameter) to capture the soil response in the sand layer correctly.

Identification of soil layer boundaries using mechanical layered method base on piezocone penetration test data

Earth Layer Recognition During the Shield Machine Digging and Control Strategy of the Cutter Head Speed

Extended Precise Integration Solution For Plane Strain Problem Of Transversely Isotropic Multilayered Soils

Modelling T-bar Penetration in Soft Clay Using Large-Displacement Sequential Limit Analysis

Machine learning-enhanced soil classification by integrating borehole and CPTU data with noise filtering

Identification of Statistically Homogeneous Soil Layers Using Modified Bartlett Statistics

Strength interpretation parameter of piezoncone penetration test for soft clay in offshore area of Hangzhou Bay

Analysis Of Consolidation Processing Of Piezocone Penetration Test In Cutoff Wall

Machine Learning Method for CPTu Based 3D Stratification of New Zealand Geotechnical Database Sites.

A Novel Method for Estimating the Undrained Shear Strength of Marine Soil Based on CPTU Tests

An Approach to Evaluate Hydraulic Conductivity of Soil Based on Cptu Test

Effect of Large Deformation Analysis for Site Investigation Tool - CPT in Layered Soils

Study on Defect Classification in Multi-Layer Structures Based on Fisher Linear Discriminate Analysis by Using Pulsed Eddy Current Technique

A Comprehensive Review of the Evaluation and Application of Engineering Properties of Expansive Soil Based on Piezocone Penetration Test (CPTU)

Spatial Variability of the Mechanical Parameters of High-Water-Content Soil Based on a Dual-Bridge CPT Test

A Method for Characterizing Defects in Multi-Layer Conductive Structures by Combining Pulsed Eddy Current Signals with PCA Components

Squeezing Effects Of Jacked Pile In Layered Soil

Defect localisation and quantitative identification in multi-layer conductive structures based on projection pursuit algorithm

A Penetration Processing Study of Piezocone Penetration Test in Cutoff Wall

A cone penetration test database for multiple thin-layer correction procedure development

Numerical simulation of cone penetration test by using CFD–DEM coupled analysis