Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. In a micro centrifugal pump with tip clearance working at high speed, the pressure fluctuation and complex vortex structures related to the tip leakage flow are conducted. The external characteristics calculated by the numerical simulation and experiment method agree well, and the maximum deviation of the simulated pump head and efficiency compared with the experimental data is less than 5%. The vortex structures induced by the tip clearance flow, which is less influenced by the flow conditions, can be divided into four categories, namely backflow vortex, passage vortex, primary tip clearance flow (PTLV), and separation TLV (STLV). The evolution of these vortex structures is described by the relative vorticity transport equation, using the relative vortex stretching, Coriolis force, and viscous diffusion. The PTLV starts from the corner of blade tip gap near the leading edge (LE), and breaks away into the STLV in the region of 0.7R* to 0.8R* owing to the pushing effect of the secondary tip leakage flow. To analyze the leakage flow quantitatively, the relative velocity in the gap region is decomposed. The results show that the local maximal and minimal values of the normal component correspond to the start position of the PTLV and the separation region of the STLV, respectively. Besides, the passage vortex has the greatest contribution to the pressure pulsation of the passage from main blade to main blade (MB). But the dominant frequency of the pressure alterations has little to do with the vortex, and mainly depends on the rotor-stator interaction (RSI) between the impeller and volute tongue. The results could be referred to improve the efficiency and operational stability of the high-speed centrifugal pumps.

Effect of Tip Clearance on Hydraulic Performance of Water-jet Pump

Effect of Taper Angle on the Performance of Jet Pumps for a Loop-Structured Thermoacoustic Engine

Effect of Tip Clearance on Helico-Axial Flow Pump Performance at Off-Design Case

Analysis of the impeller's tip clearance size on the operating characteristics of the underwater vehicle with a new high-speed water jet propulsion pump

Effect of Tip Clearance on the Cavitation Performance of High-Speed Pump-Jet Propeller

Experimental and Numerical Investigation on the Tip Leakage Vortex Cavitation in an Axial Flow Pump with Different Tip Clearances

Effect of the tip clearance on tip leakage vortex and pressure fluctuation characteristics in a helico-axial flow multiphase pump

Design Method of Water Jet Pump Towards High Cavitation Performances

Numerical Study of Porous Tip Treatment in Suppressing Tip Clearance Vortices in Cavitating Flow

Experimental and numerical study on cavitation pulsating pressure of water-jet propulsion axial-flow pump

Study on the Influence of Tip Clearance on Cavitation Performance and Entropy Production of an Axial Flow Pump

Numerical Investigation of Tip Clearance Effects on the Performance and Flow Pattern Within a Sewage Pump

Effects of tip clearance on energy performance of three-stage electrical submersible pump

Influence of Tip Clearance on Unsteady Flow in Automobile Engine Pump

Analysis of Tip Clearance Effect on the Transportation Characteristics of a Multiphase Rotodynamic Pump Based on the Non-Uniform Bubble Model

Cavitation Performance Improvement of High Specific Speed Mixed-Flow Pump

The Influence of Blade Tip Clearance on the Flow Field Characteristics of the Gas–Liquid Multiphase Pump

Investigation of cavitation and flow characteristics of tip clearance of bidirectional axial flow pump with different clearances

Numerical simulation on the influence of root clearance on the hydraulic performance of axial flow pump device

Numerical Study of Tip Leakage Vortex Around a NACA0009 Hydrofoil

Effect of tip clearance flow on pressure oscillation and vortex patterns of a high-speed centrifugal pump