Abstract:Unlike DC motors and synchronous motors, they are maintenance-free motors due to the absence of brushes, commutators and slip rings. Induction motors can be operated in polluted and explosive environments as they do not have brushes which can cause sparks. In this paper, the performance of two control techniques, namely direct torque control (DTC) and predictive torque control (PTC), are compared in transient and static states when applied to a faulty induction machine (IM). The current and torque ripples is evaluated in a healthy machine, as well as in the presence of faults, at various speed and load values. During the transient state, the objective is to assess the method that provides the optimal dynamic response, which is achieving the desired speed without any overshooting while during the static state, the objective is to minimize torque ripple and harmonics in the stator current. The Discrete Wavelet Transform (DWT) is used to analyze stator phase current. In addition, the energy eigen value (EEV) analysis has been used to determine the fault severity. The healthy and faulty systems are simulated using Matlab/Simulink for the two control methods. The results show the superiority of the PTC method compared to the DTC. A comparison of the proposed control method with other works reported in the literature is performed to verify the superiority of the proposed strategy.

Dual-Vector-Based Predictive Torque Control for Fault-Tolerant Inverter-Fed Induction Motor Drives With Adaptive Switching Instant

Fault-Tolerant Predictive Torque Control Design for Induction Motor Drives Based on Discrete Space Vector Modulation

Predictive Current Control for Seven-Phase Induction Motor Based on the Optimal Operating Time of Four-Dimensional Vector

A Sequential Direct Torque Control Scheme for Seven-Phase Induction Machines Based on Virtual Voltage Vectors

Modulated Model Predictive Torque Control for Fault-Tolerant Inverter-Fed Induction Motor Drives With Single DC-Link Voltage Sensor

Predictive DTC Strategy With Fault-Tolerant Function for Six-Phase and Three-Phase PMSM Series-Connected Drive System

Fault Tolerant Inverter Based Direct Torque Control for Permanent Magnet Synchronous Motor

Fault-Tolerant Control of Five-Phase Induction Motor under Single-Phase Open

An Improved Open-Phase Fault-Tolerant DTC Technique for Five-Phase Induction Motor Drive Based on Virtual Vectors Assessment

Four-Switch Inverter Fed PMSM DTC with SVM approach for Fault Tolerant operation

Single- and Two-Phase Open-Circuit Fault Tolerant Control for Dual Three-Phase PM Motor Without Phase Shifting

Fault-Tolerant Direct Torque Control of Five-Phase Permanent Magnet Synchronous Motor under Single Open-Phase Fault Based on Virtual Vectors

Predictive Direct Torque Control of Induction Motor Fed by Matrix Converter

Sensorless Predictive Torque Control Strategy of Induction Motor Based on Stratified Optimization Method

Predictive control of torque and flux of induction motor drives

A novel model‐predictive direct control for induction motor drives

Variable Sampling Frequency Model Predictive Torque Control for VSI-Fed IM Drives Without Current Sensors

Predictive Torque Control for PMSM Based on Weighting Factor Elimination and Fast Voltage Vector Selection

Direct Torque Control for Induction Motors Based on Minimum Voltage Vector Error

Virtual vectors based predictive control of torque and flux of induction motor and speed sensorless drives

Predictive torque control of induction motor for rotor bar faults diagnosis