Abstract:This work presents an LC filter design methodology that considers the impact of filter design on the converter system. An in‐depth analysis and discussion of the design of each part of the system is provided, as well as example designs aiming to achieve minimum volume, maximum efficiency, or maximum lifetime. This work presents an LC filter design methodology that considers the optimization of the converter as a whole: filter, semiconductor switches, and DC bus. The optimization is made in light of the system losses, volume, and the capacitors lifetime, discussing the advantages and disadvantages of decisions in the parametric design of the filter (of the values of L and C). The technology of components and construction challenges are considered in the design. The manuscript guides the design process of the filter in two steps: first, by providing the means to perform the parametric sweep of possible filter designs, according to the converter specifications and other restrictions; second, by describing how the hardware design is carried out and indicating the models and methods that are being used. Individualized analyses for each part of the converter system are made, and using the proposed methodology, three design examples are provided and analyzed, each choosing the filter parameters with different objectives: minimum volume, maximum capacitor lifetime, or maximum efficiency. Results show that using Kool M μ material results in the lowest filter volumes and losses. It is also shown that for the DC bus design, there is a compromise between volume and lifetime, with a greater number of capacitors increasing both attributes. By designing the system using the proposed methodology, the minimum volume is achieved at an operating point that differs from the individual minimum volumes of the filter and the inverter, and the lifetime is only 1.78% than the maximum lifetime point.

Design of LC Filter for Boost Converter with the Considerations of Efficiency and Power Density.

Boost-LLC High Efficiency DC/DC Converter

An Optimization Design of Output Filter in a Grid Connected Inverter With Flexible Multilayer Foil Technique

Design of Input Filter for DC/DC Converter

LC filter optimized design considering the effect on the power converter and capacitor lifetimes

Design of High-gain Converter for Low Input Voltage and High Input Current in Energy Feedback Electronic Load System

Design of LCL-Filter Based Three-level Active Power Filter

Design of Interleaved Boost Converter in Energy-Feedback Electronic Power Load

Pareto-Frontier-Based Multi-Objective Design of Output LC Filter for High Efficiency, High Reliability, and High Power-Density Buck Converter

Integration of Both EMI Filter and Boost Inductor for 1-Kw PFC Converter

A Step-by-Step Design for Low-Pass Input Filter of the Single-Stage Converter

High Power Density Three-Phase Shunt Active Power Filter Design Based on Multiple Magnetic Integrations of Lcl Filter

A PFC Converter With Novel Integration of Both the EMI Filter and Boost Inductor

Comprehensive Design and Optimization of a High-Power-Density Single-Phase Boost PFC

PFC converter with novel integration of both EMI filter and Boost inductors

Design of A DC/DC Auxiliary Converter for Car Charger

A High Power Density And Efficiency Bi-Directional Dc/Dc Converter For Electric Vehicles

Design of LC Filter in Synchronous Buck considering Power Loss and Cost Criterions using Particle Swarm Optimization

An Optimization Design for Transformer and Output Filter of a Micro-inverter with Passive Integration Technique

A High Power Density 3-Phase/1-phase Compatible MISN-PFC Converter for On-Board Charger

Optimal Design Method of Interleaved Boost PFC for Improving Efficiency from Switching Frequency, Boost Inductor, and Output Voltage