Abstract:The electric arc furnace dust (EAFD) is rich in zinc and iron, which is classified as a hazardous solid waste and generated during steelmaking in electric arc furnace. As an important secondary resource for zinc, the zinc extraction from EAFD has become crucial resource utilization direction. In this work, a novel process is proposed to extract zinc and separate iron for one-step through co-roasting EAFD with NH4HSO4 , followed by water leaching. Through the co-roasting of EAFD and NH4HSO4 , the zinc-containing phases in EAFD were transformed into ZnSO4 , and the iron-containing phases were transformed into Fe2O3. The separation of Zn and Fe was then performed by water leaching. The determined optimal experimental conditions were the mass ratio of NH4HSO4/ EAFD of 0.75, the roasting temperature of 600 celcius, the holding time of 3 h, and the leaching time of 1 h, in which 91.14% of Zn and 3.25% of Fe were dissolved in the leaching solution. Afterwards, the reaction mechanisms of the co-roasting process of EAFD and NH4HSO4 were revealed. When the temperature increased, the zinc-containing phase (NH4)2Zn(SO4)2 and iron-containing phase NH4Fe(SO4)2 were first generated. (NH4)2Zn (SO4)2 was then successively converted to ZnSO4 , and NH4Fe(SO4)2 was decomposed into Fe2O3 and Fe2(SO4)3. SO3 produced by NH4HSO4 decomposition in the roasting process can continue to participate in the sulfation process. Subsequently, zinc was enriched in the leaching solution, which can be considered as the raw material for Zn electrodeposition. Iron entered the leaching residue as Fe2O3 , which can be used as the raw material for ironmaking. The result of leaching toxicity test showed that most of the heavy metals (i.e., Pb and Cr) were fixed in the leaching residue, which met the national standards for leaching toxicity. This study provides a theoretical reference and technical support for zinc extraction from zinc-containing solid wastes.

Zinc Extraction from Zinc Oxidized Ore Using (NH4)2SO4 Roasting-Leaching Process

Ammonia Leaching of Zinc from Low-grade Oxide Zinc Ores Using the Enhancement of the Microwave Irradiation

Zinc recovery from zinc calcine by selective reduction roasting and acid leaching

Optimization Study on the Leaching of High Iron-Bearing Zinc Calcine after Reduction Roasting

Reduction Roasting of High Iron-Bearing Zinc Calcine under a CO-CO2 Gas: an Investigation of the Chemical and Mineralogical Transformations

Extraction, phase transformation and kinetics of valuable metals from nickel-chromium mixed metal oxidized ore

A Novel Method to Recover Zinc and Iron from Zinc Leaching Residue

Selective Extraction of Zinc from High Iron-Bearing Zinc Calcine by Reduction and Magnetization Roasting

Sulfidation Roasting of Zinc Leaching Residue with Pyrite for Recovery of Zinc and Iron

One-step Extraction of Zinc and Separation of Iron from Hazardous Electric Arc Furnace Dust Via Sulphating Roasting-Water Leaching

Reduction Roasting of High Iron Bearing Zinc Calcine for Recovery of Zinc and Iron

Recovery of iron from zinc leaching residue by selective reduction roasting with carbon.

Characteristics of the reduction behavior of zinc ferrite and ammonia leaching after roasting

High-Zinc Recovery from Residues by Sulfate Roasting and Water Leaching

Extraction of Molybdenum and Nickel from Roasted Ni–Mo Ore by Hydrochloric Acid Leaching, Sulphation Roasting and Water Leaching

Innovative Methodology for Comprehensive Utilization of High Iron Bearing Zinc Calcine

Decomposition of Zinc Ferrite in Zinc Leaching Residue by Reduction Roasting

Selective reduction process of zinc ferrite and its application in treatment of zinc leaching residues

The Extraction of Valuable Metals and Phase Transformation and Formation Mechanism in Roasting-Water Leaching Process of Laterite with Ammonium Sulfate

Extraction of molybdenum and nickel from carbonaceous shale by oxidation roasting, sulphation roasting and water leaching

Improvement of mechanochemical leaching of zinc oxide ore — Optimization of grinding parameters for basket grinder