Abstract:Sensor offsets have a significantly negative impact on control optimization, operation and maintenance management, and energy consumption in building energy systems. Previous studies have employed various methods to detect, diagnose, and calibrate these sensor offsets. However, the definition of sensor offsets in these methods has largely relied on experiential knowledge, lacking a comprehensive analysis and discussion of the underlying reasons for sensor offset occurrence and its specific characteristics in terms of magnitude, form, and number. To address this issue, redundant sensors with the same or higher accuracy were installed adjacent to the original sensors in a variable air volume (VAV) system. The same data acquisition module was used to collect measurements from both the original and redundant sensors. Subsequently, the study meticulously analyzed sensor offsets under different operation conditions, including summer, winter, and transition seasons, as well as at distinct locations on the water and air sides, and various working stages, namely stable and dynamic stages. The results demonstrated that the sensor offset was influenced by the change of different operation conditions. However, the average offsets of most sensors were basically the same under different operation conditions. In contrast, the air side, where numerous sensors were deployed, exhibited a non-uniform airflow and rapidly changing measurements, consequently resulting in a larger offset (30.4 %) compared to the water side (9.26 %). Regarding the offset characteristics, temperature sensors were found to be a constant in offset form for stable or large fluctuation by dividing working stages, while differential pressure or flow rate sensors exhibited a normal distribution. Leveraging these analyses, a robust framework for defining sensor offsets was established, enabling the effective application of virtual sensing technology in practical building energy systems.

Modeling and analysis of sensor uncertainty for non-iterative air balancing methods

A Cfd-Based Test Method For Control Of Indoor Environment In Air-Conditioned Rooms

A Robust Air Balancing Method for Dedicated Outdoor Air System

A Novel Air Balancing Method for HVAC Systems by a Full Data-Driven Duct System Model

Air balancing method of multibranch ventilation systems under the condition of nonfully developed flow

Analysis of sensor offset characteristics in building energy systems based on redundant sensors: A case study on variable air volume system

A Novel Data-Driven Air Balancing Method with Energy-Saving Constraint Strategy to Minimize the Energy Consumption of Ventilation System

An Energy-Saving Oriented Air Balancing Strategy for Multi-Zone Demand-Controlled Ventilation System

Data-driven model-based flow measurement uncertainty quantification for building central cooling systems using a probabilistic approach

An Air Balancing Method Using Artificial Neural Networks for the Ventilation System

An Energy-Saving Oriented Air Balancing Method for Demand Controlled Ventilation Systems with Branch and Black-Box Model

Methodology of data reconciliation and parameter estimation for variable load in process system

Nonlinear Dynamic Models with Uncertainties Measured by Fuzzy Sets for Radiator-Heated Buildings

Heat Equation Stein Variational Ensemble: Rethinking and Advancing Uncertainty-Aware Soft Sensor Modeling

Sensitivity and Uncertainty Analysis of Nonideal Calibration Standards for 16-Term Error Model

A 3-Stage Online Distributed Cooperative Control Based Air Balancing Method for Air Duct Systems

Modelling of received ultrasonic signals based on variable frequency analysis

An Uncertainty-Tolerant Robust Distributed Control Strategy for Building Cooling Water Systems Considering Measurement Uncertainties

Bayesian-based dynamic measurement uncertainty analysis of dynamic balancing machines

Improving Non-isothermal Airflow Pattern Designing with CFD Method

Modelling calibration uncertainty in networks of environmental sensors