Abstract:To quantify the effect of structural through-thickness reinforcement in foam core sandwich composite panels, an experimental study was carried out which included three-point bending tests, core shear tests, flatwise tensile and compression tests, as well as edgewise compression tests. Standard test procedures based on ASTM guidelines are followed to test the behavior of the stitched panels with reinforcement at 90 degree orientation with respect to the sandwich faces. The test specimens were manufactured by using polyurethane foam Rohacell 71 IG and carbon fiber reinforced composite facesheets. The dry perform facesheets and foam core were then assembled in a dry lay-up already stitched. Kevlar 29 yarn was used to stitch both sets of panels. The results showed a significant effect of the stitching on the in-plane Young’s modulus which was attributed to local displacements of the in-plane fibers and changes in the fiber volume fraction. Stitching of sandwich panels significantly increases the maximum failure loads under flexure, core shear, flatwise tensile, flatwise compression, and edgewise compression loading. A finite element based unit-cell model was developed to estimate the elastic constants of structurally stitched foam core sandwich composite panels taking into consideration the yarn diameter, the stitching pattern and direction as well as the load direction. Depending on these parameters, local changes of the fiber volume fraction as well as regions with undisturbed and disturbed fiber orientations within the laminate plies are taken into account. A good match between the finite element modeling and the experimental data was obtained. The present work should be considered as a step towards developing a more sophisticated numerical model capable of describing mechanical behavior of sandwich structures.

Fabrication and Mechanical Characterization of CFRP X-core Sandwich Panels

Three-point bending behaviors of the foam-filled CFRP X-core sandwich panel: Experimental investigation and analytical modelling

Fabrication and mechanical behaviors of an all-composite sandwich structure with a hexagon honeycomb core based on the tailor-folding approach

Mechanical Behavior of Carbon Fiber Reinforced Polymer Composite Sandwich Panels with 2-D Lattice Truss Cores

FABRICATION AND MECHANICAL RESPONSE OF CARBON FIBER SANDWICH PANELS WITH PYRAMIDAL TRUSS CORES

Experimental and Analytical Study on the Mechanical Behavior of Stitched Sandwich Composite Panel with a Foam Core

Fabrication and Mechanical Behavior of Carbon Fiber Composite Sandwich Cylindrical Shells with Corrugated Cores

Fabrication and Testing of Carbon Fiber Reinforced Truss Core Sandwich Panels

Fabrication and Mechanical Properties of Thermoplastic Corrugated Sandwich Panel with Enhanced Face-Core Interface

Mechanical Properties of Sandwich Composites Made of FRP Panels and Strengthened Foam Cores

Compressive Response and Energy Absorption of All-Composite Sandwich Panels with Channel Cores

Manufacturing and characterisation of a new thermal pre-stressed carbon fibre-reinforced lattice core for sandwich panels

Compression Response of Sandwich Structure with M-Type CFRP Foldcore

Mechanical Response and Failure Mechanism of Fiber Reinforced Composite Truss Core Sandwich Structures

Mechanical Behavior of Sandwich Panels with Hollow Al-Si Tubes Core Construction

Mechanical Behaviour of CFRP Sandwich Structures with Tetrahedral Lattice Truss Cores

Bending Response and Failure Mechanism of Composite Sandwich Panel with Y-frame Core

Experimental and Theoretical Study of Sandwich Panels with Steel Facesheets and Gfrp Core

Fabrication and Failure Mechanisms of Ultralight All-Cfrp Sandwich Cylinders under Axial Compression

Mechanical behaviours of composite sandwich panel with strengthened pyramidal truss cores

Fabrication and Compressive Behavior of Carbon-Fiber-reinforced Cylindrical Foldcore Sandwich Structure