Abstract:Human society’s need to build low-weight, high-strength and durable structures has increased the demand for composite materials. In this case, composites are used where high mechanical strength, low weight, sound and thermal insulation properties are required. One of the most important issues now is designing materials and coatings aimed at reducing heat loss and resisting high temperatures. One way to address this problem is to develop a technique for preparing and applying composite materials that slow down their heating applied to a surface. In this study, carbon nanotubes (CNTs) reinforced composites were fabricated using silicone molding to be applied to honeycomb sandwich structures. To determine the effect of CNTs on the thermal behavior of the sandwich panels, different weight percentages of this material (0.025, 0.05. 0.075 wt.%) were added to the epoxy resin. The results showed that the thermal stability of the epoxy composites was directly related to the increase in the percentage of CNTs as the CNT content increased to 0.075 wt.%, and the thermal degradation temperature of the epoxy composites increased by 14 °C. In addition, the energy absorption increased by 4.6% with an increase in CNTs up to 0.075 wt.%. Density measurements showed that the density of the nanocomposite samples increased by adding CNTs to pure epoxy resin. The actual densities of the samples reinforced with 0.025, 0.05, and 0.075 wt.% CNTs are 0.925, 0.926, and 0.927 of the theoretical density, respectively. Since the CNT dispersion uniformity in the epoxy matrix can significantly affect the properties of the composites, in this study, a new method of dispersing CNTs in the epoxy resin matrix resulted in higher thermal conductivity while using lower amounts of CNTs compared to other studies. The storage modulus of the epoxy matrix composites reinforced with 0.05 wt.% in this study was 25.9% and 6.9% higher than that from the previous study reinforced with 0.1 wt.% and 0.25 wt.% CNTs, respectively. Furthermore, the tanδ and loss modulus of the composite reinforced with 0.05 wt.% CNTs in this study were 52% and 54.5% higher than that from the previous study with 0.1 wt.% CNTs, respectively. This study provided an optimal approach for designers and engineers who want to effectively design their composite honeycomb sandwich structure with better thermal properties.

Thermal Insulation and Char Layer Mechanical Properties of a Novel Ethylene Propylene Diene Monomer Composite Reinforced with Carbon Nanotubes Coated Via Chemical Vapour Deposition

Thermal Insulation Performance and Ablation Resistance of Ethylene Propylene Diene Monomer Insulation Materials Reinforced with Polydopamine-Coated Carbon Nanotubes

Erosion Resistance of Ethylene Propylene Diene Monomer Insulations Reinforced with Precoated Multi-Walled Carbon Nanotubes

Effects of Carbon Nanotubes on Char Structure and Heat Transfer in Ethylene Propylene Diene Monomer Composites at High Temperature

Development of EPDM Composites Reinforced by CNTs@SiO2 for Thermal Protection Systems of Aerospace Propulsion: Significant Improvement in Oxidation and Ablation Resistance Properties

Effect of multi-walled carbon nanotubes on thermal stability and ablation properties of EPDM insulation materials for solid rocket motors

Effects of Carbon Nanotubes and Carbon Fiber Reinforcements on Thermal Conductivity and Ablation Properties of Carbon/phenolic Composites

Effects of Inorganic Nanofibers and High Char Yield Fillers on Char Layer Structure and Ablation Resistance of Ethylene Propylene Diene Monomer Composites

Effects of SiO2-coated CNTs on the Directional Formation of SiC Whiskers and Improvement in the Ablative Resistance of Polymer-Matrix Composites

Effects of Multi-Walled Carbon Nanotubes on Char Residue and Carbothermal Reduction Reaction in Ethylene Propylene Diene Monomer Composites at High Temperature

Effect of Different Nanostructured SiC on Thermal, Ablation and Char Layer Mechanical Properties of Ethylene Propylene Diene Monomer Composites

A lightweight rubber foaming insulation reinforced by carbon nanotubes and carbon fibers for solid rocket motors

Carbon Nanotube Reinforced Ablative Material For Thermal Protection System With Superior Resistance To High-Temperature Dense Particle Erosion

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Effects of SiO 2 -coated CNTs on the directional formation of SiC whiskers and improvement in the ablative resistance of polymer-matrix composites

Effects of MWCNTs on Char Layer Structure and Physicochemical Reaction in Ethylene Propylene Diene Monomer Insulators.

Improving thermal shock and ablation resistance of high thermal conductivity carbon/carbon composites by introducing carbon nanotubes

Synergistic Effect of Polyphosphazene Nanotubes and Graphene on Enhancing Ablative Resistance of Ethylene Propylene Diene Monomer Insulation Composites

Electrophoretic deposition of carbon nanotubes onto carbon fiber felt for production of carbon/carbon composites with improved mechanical and thermal properties

Layered Montmorillonite/3D Carbon Nanotube Networks for Epoxy Composites with Enhanced Mechanical Strength and Thermal Properties

Effects of Carbon Nanotubes on Thermal Behavior of Epoxy Resin Composites