Abstract:The physical and mechanical properties of rocks change significantly after being subjected to high temperatures, which poses safety hazards to underground projects such as coal underground gasification. In order to investigate the effect of temperature on the macroscopic and microscopic properties of rocks, this paper has taken sandstone as the research object and conducted uniaxial compression tests on sandstone specimens at different temperatures (20–1000 °C) and different heating rates (5–30 °C/min). At the same time, the acoustic emission (AE) test system was used to observe the acoustic emission characteristics of the rock damage process, and the microstructural changes after high temperature were analyzed with the help of a scanning electron microscope (SEM). The test results show that the effect of temperature on sandstone is mainly divided into three stages: Stage I (20–500 °C) is the strengthening zone, the evaporation of water and the contraction of primary fissures, and sandstone densification is enhanced. In particular, the compressive strength and elastic modulus increase, the macroscopic damage mode is dominated by shear damage, and the fracture micromorphology is mainly brittle fracture. Stage II (500–600 °C) is the transition zone, 500 °C is the threshold temperature for the compressive strength and modulus of elasticity, and the damage mode changes from shear to cleavage damage, and the sandstone undergoes brittle–ductile transition in this temperature interval. Stage III is the physicochemical deterioration stage. The changes in the physical and chemical properties make the sandstone compressive strength and modulus of elasticity continue to decline, the macroscopic damage mode is mainly dominated by cleavage damage, and the fracture microscopic morphology is of a more toughness fracture. The effect of different heating rates on the mechanical properties of sandstone was further studied, and it was found that the mechanical properties of the rock further deteriorated under higher heating rates.

Laboratory Investigation of the Temperature Influence on the Mechanical Properties and Fracture Crack Distribution of Rock under Uniaxial Compression Test

The Influence of Temperatures on the Mechanical Properties and Fracture Behavior of Rocks under Mixed Mode I/II Loading

Experimental study on the variation of physical and mechanical of rock after high temperature treatment

A Micromechanical-Based Failure Criterion for Rocks after High-Temperature Treatment

Investigation of the fracture characteristics of granite and green sandstone under different thermal treatments

Uniaxial compression tests on red sandstone specimens after different high-temperature processing and cooling time

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

The impact of high temperature on mechanical properties and behaviors of sandstone

Study on mechanical properties of interbedded rock masses with microcrack based on thermal-mechanical coupling

Study on dynamic fracture properties of sandstone under the effect of high-temperature using large-scale sample

Investigation of the Fracture Characteristics of Rock Mass After Thermal–Mechanical Damage Coupling

Effects of thermal treatment on the fracture behavior of rock-concrete bi-material specimens containing an interface crack

Fracture properties and dynamic failure of three-point bending of yellow sandstone after subjected to high-temperature conditions

Effects of high temperature on the mechanical behaviors of sandstone under true-triaxial unloading conditions

Thermal Effects on Tension Softening Response and Fracture Characteristics of Quartz-Diorite

A novel true triaxial test device with a high-temperature module for thermal-mechanical property characterization of hard rocks

Preparing rock samples using high temperature heating damage method and its application

Combined effects of high temperature and lithology on the tensile mechanical damage and fracture surface morphology of reservoir rocks

The development of rock fracture from microfracturing to main fracture formation

Physical and Mechanical Properties and Damage Mechanism of Sandstone at High Temperatures

Uniaxial Compressive Behaviors of Sandstone-concrete Binary with Rough Interface after High Temperatures