Abstract:Corrosion behavior of ferritic (Fe–14Cr–2W+Y2O3) and ferritic–martensitic (Fe–9Cr–2W+Y2O3) oxide dispersion strengthened (ODS) steels in the static isothermal liquid Pb was investigated at 550 and 650°C depending on the oxygen concentration CO in the melt for duration up to 1000h. It was determined that the interaction mode of steels changes from the dissolution in the pure Pb (CO⩽10−14wt%O) to the formation of protective oxide layers on the surface of steels in the oxygen-added Pb (CO∼10−6wt%O) and to formation of multiphase non-protective scales in the Pb saturated by oxygen (CO∼10−3wt%O). In general, the observed corrosion behavior of ODS steels coincides with that of traditional chromium steels. However, specific structure of ODS steels causes some variations in corrosion process. In the pure Pb (CO⩽10−14wt%O) the fine-grained structure promotes inter-granular corrosion attack and penetration of lead into steel matrix along grain boundaries. Increase in Cr content in the steel promotes corrosion attack. In the oxygen-added Pb (CO∼10−6wt%O) the fine-grained structure, vice versa, ensures formation of oxide layers with higher Cr content due to fast diffusion of Cr into growing oxide along grain boundaries. The protective properties of oxide layers are improved with temperature rise (550→650°C) and chromium content in steel. In the oxygen-saturated Pb (CO∼10−3wt%O) the ODS steels undergo severe oxidation accompanied by the formation of non-protective multiphase scale which consist of mixture of different oxide phases: plumboferrite, magnetite, Fe–Cr spinel and free Pb. The oxidation kinetics intensifies drastically with temperature and decelerates with increasing chromium content in the steel. Based on the experimental data the scheme of interaction of components in the "steel - liquid Pb” system depending on temperature and oxygen content is proposed.

Oxidation Behavior Analysis of a Ferritic ODS Steel in Supercritical Water

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Corrosion Behavior of a 14Cr-Ods Steel in Supercritical Water

Corrosion Behavior of Oxide Dispersion Strengthened Ferritic Steels in Supercritical Water

Study of the Corrosion Behavior of a 18Cr-Oxide Dispersion Strengthened Steel in Supercritical Water

Corrosion Behavior of an Al Added High-Cr ODS Steel in Supercritical Water at 600 °C

Corrosion Behavior of Austenitic ODS Steel in Supercritical Water

Corrosion Behavior of a 304-Oxide Dispersion Strengthened Austenitic Stainless Steel in Supercritical Water

CORROSION BEHAVIOR OF SUPER-AUSTENITIC STAINLESS STEEL AL-6XN IN SUPERCRITICAL WATER

Oxidation Behavior of 9Cr-4.5Al ODS Steel in 600 °C Supercritical Water and the Effect of Pre-Oxidation

Corrosion Behavior of Ferritic ODS Steel Prepared by Adding YH2 Nanoparticles in Supercritical Water at 600 °C

Corrosion Behavior of 14cr ODS Steel in Supercritical Water: the Influence of Substituting Y2O3 with Y2Ti2O7 Nanoparticles

Oxidation behavior of the T91 ferritic/martensitic steel and 304 austenitic stainless steel in supercritical water

A Comparative Study on the Oxidation of Austenitic Alloys 304 and 304-Oxide Dispersion Strengthened Steel in Supercritical Water at 650 °C

Corrosion Behavior of 304 Stainless Steel in Supercritical Water

Effects of Dissolved Oxygen on the Oxide Scales Formed on Ferritic-Martensitic Steel T12 Exposed to Supercritical Water

Corrosion Behavior of Ferritic/Martensitic Steels CNS-I and Modified CNS-II in Supercritical Water

CORROSION BEHAVIORS OF NUCLEAR-GRADE STAINLESS STEEL AND FERRITIC-MARTENSITIC STEEL IN SUPERCRITICAL WATER

A High-Resolution Study of the Different Surface State Effects on the Corrosion Behaviors of a Ferritic Steel and an Austenitic Steel in Supercritical Water

Corrosion Behavior of Fe–14Cr–2W and Fe–9Cr–2W ODS Steels in Stagnant Liquid Pb with Different Oxygen Concentration at 550 and 650°C

Understanding the surface oxide evolution of T91 ferritic-martensitic steel in supercritical water through advanced characterization