Abstract:Poor understanding of composite powder properties is a bottleneck in the design of high-performance metallic components via laser powder bed fusion (L-PBF). Traditional particle- or fiber-like fillers are known to result in reduced powder flowability and the uncontrollable morphology of composite powders. In this work, we demonstrate a first example of improving the powder properties and L-PBF manufacturability of metallic powders decorated by two-dimensional (2D) nanofillers. 0.5 wt% graphene oxide (GO) sheets were uniformly adhered onto the surface of Ti-6Al-4V (Ti64) powders via an electrostatic self-assembly, with their spherical morphology and particle size uncompromised. The notably enhanced quality of the GO-decorated Ti64 (GO@Ti64) powder bed, indicated by the results of a novel centrifugal separation testing and a recoating experiment, was attributed to the significant reduction in powder/powder and powder/substrate adhesive forces. Moreover, while the thermal conductivity of the GO@Ti64 powders was found to decrease, the laser absorptivity increased as a result of multiple local absorptions of wrinkled GO. The optimal process zone of GO@Ti64 powders was therefore shown to have been extended and to have become wider, enhancing L-PBF printability. High-resolution transmission electron microscopy inspections revealed that the GO/Ti64 build fully consisted of ultrafine martensite structures with a lath width of similar to 91 nm. This novel structure was attributed to the high-temperature, nonequilibrium densification of L-PBF; the complete dissolution of the 2D GO nanosheets into the Ti64 matrix generated a novel carbon-supersaturated, precipitation-free structure. The grain refinement and solid-solution strengthening behaviors led to an increase in the yield strength of the GO/Ti64 build from 1375 MPa to 1793 MPa, and also an increase in its compressive strength, from 1796 MPa to 2032 MPa. The results of this investigation contribute to a better understanding of composite powder properties and can be seen as a significant step toward the preparation of high-performance metallic components via L-PBF.

Microstructure and Mechanical Property of Graphene Oxide/alsi10mg Composites Fabricated by Laser Additive Manufacturing

Microstructures and Mechanical Properties of Carbon-Added Ti Composites Fabricated by Laser Powder Bed Fusion or Spark Plasma Sintering

Graphene oxide/Al composites with enhanced mechanical properties fabricated by simple electrostatic interaction and powder metallurgy

Effect of Aluminium Content and Processing Parameters on the Microstructure and Mechanical Properties of Laser Powder-Bed Fused Magnesium-Aluminium (0, 3, 6, 9wt%) Powder Mixture

Simultaneous Enhancement in Mechanical and Physical Properties of Graphene-Oxide-reinforced Al Matrix Composites by Trace-Mg-alloying Strategy

Simultaneous Enhancement of Powder Properties, Additive Manufacturability, and Mechanical Performance of Ti–6Al–4V Alloy by 2D-Nanocarbon Decoration

Graphene oxide and graphene nanosheet reinforced aluminium matrix composites: Powder synthesis and prepared composite characteristics

Microstructure and mechanical properties of graphene and nano-zirconia reinforced AlSi10Mg composite fabricated by laser powder bed fusion

In Situ Formation of Uniformly Dispersed Al4C3 Nanorods During Additive Manufacturing of Graphene Oxide/al Mixed Powders

Laser Powder Bed Fusion of Oxidized Microscale SiC-particle-reinforced AlSi10Mg Matrix Composites: Microstructure, Porosity, and Mechanical Properties

Graphene nanoplatelets reinforced Al-Cu-Mg composite fabricated using laser powder bed fusion: microstructure, mechanical properties, and wear behaviour

Graphene/ZrO2/aluminum Alloy Composite with Enhanced Strength and Ductility Fabricated by Laser Powder Bed Fusion

Advancements in Laser Powder Bed Fusion of Carbon Nanotubes-Reinforced AlSi10Mg Alloy: A Comprehensive Analysis of Microstructure Evolution, Properties, and Future Prospects

Unlocking the Potential of Graphene-Reinforced AlSi10Mg Nanocomposites in Laser Powder Bed Fusion: A Comprehensive Review

Uniform dispersion of graphene oxide in aluminum powder by direct electrostatic adsorption for fabrication of graphene/aluminum composites.

Recent progress of aluminum alloys and aluminum matrix composites produced via laser powder bed fusion: a review

Graphene oxide-reinforced aluminum alloy matrix composite materials fabricated by powder metallurgy

Effect of Nano-Si3N4 Reinforcement on the Microstructure and Mechanical Properties of Laser-Powder-Bed-Fusioned AlSi10Mg Composites

Effect of MgO particles with in-situ graphene coating on mechanical and thermal expansion properties of aluminum matrix composites

Aluminum/graphene Composites with Enhanced Heat-Dissipation Properties by In-Situ Reduction of Graphene Oxide on Aluminum Particles

Improved Mechanical Property of Nanolaminated Graphene (reduced Graphene Oxide)/al–mg–si Composite Rendered by Facilitated Ageing Process