Abstract:Aluminium Matrix Composites reinforced with ceramic particles (e.g. SiC, Al2O3, graphite and fly ash) are actually advanced engineering materials. These materials can be characterised by superior mechanical and thermal properties. However, the addition of the reinforcement particles could significantly changing corrosion behaviour of aluminium matrix composites. The corrosion resistance of aluminium matrix composites is determined by several factors such as: variety of aluminium alloy matrix and reinforcement type combinations, manufacturing technology, microstructure of composite and interfacial reactions reinforcement/matrix. This paper presents microstructural characteristic and susceptibility to pitting corrosion of on aluminium-based metal matrix (Al-Si) composites reinforced with graphite (5.7 wt. %), SiC (20 vol. %) and fly ash (9.0 wt. %) particles. The corrosion resistance experiments were carried out by accelerated electrochemical studies using the potentiodynamic method (in the 3.5 wt. % NaCl aqueous solution, pH 7.0, at 25oC). The corrosion behaviour of composite with fly ash particles was studied further by immersion tests for 50 days (3.5 wt. % NaCl). The polarisation curves, corrosion potentials (corrosion Ecorr, pitting Epit and repassivation Erp) and surface morphology after corrosion tests were estimated. It was found that: (1) the electrochemical data and microstructure observations after corrosion tests confirms that incorporation of reinforcement particles (graphite, SiC, fly ash) into aluminium matrix causes the increase of susceptibility to pitting corrosion of the composites in comparison with unreinforced matrix alloys, (2) the enhanced pitting corrosion of Al/fly ash, Al/SiC and Al/GR composites is associated with the pores, multiphasic character of composites (e.g. the releases of intermetallic Al3Ni phase), reactions at the interface reinforcement/matrix and formation of galvanic couples favourable to corrosion. The same factors also determine the properties of oxide film forming on the materials surface.

Study on Mechanical Properties and Corrosion Behaviour of Graphene-Reinforced AlSi10Mg Composite Manufactured by Additively L-PBF Technique

Graphene nanoplatelets reinforced Al-Cu-Mg composite fabricated using laser powder bed fusion: microstructure, mechanical properties, and wear behaviour

Enhancing the Mechanical Properties of AM60B Magnesium Alloys through Graphene Addition: Characterization and Regression Analysis

Investigation of graphene nanoplatelets-deposited textured metal matrix composite plates for improved mechanical properties: a numerical approach

Effects of the graphene content on mechanical properties and corrosion resistance of aluminum matrix composite

Corrosion studies on aluminium-based metal matrix composites reinforced with graphite, SiC and fly ash particles

Effects of graphene addition on the mechanical, friction and corrosion properties of laser powder bed fusion 316L stainless steel

Mechanical and conductivity properties of 6061Al matrix composites reinforced with different pH Cu-coated graphene

Effect of Aluminium Content and Processing Parameters on the Microstructure and Mechanical Properties of Laser Powder-Bed Fused Magnesium-Aluminium (0, 3, 6, 9wt%) Powder Mixture

Effect of graphene on microstructure, strain hardening and corrosion behaviour of dual phase Mg-Li matrix processed through liquid metallurgy route

Research progress on preparation technology of graphene-reinforced aluminum matrix composites

Unlocking the Potential of Graphene-Reinforced AlSi10Mg Nanocomposites in Laser Powder Bed Fusion: A Comprehensive Review

Mechanical Behaviour and Fractured Surface Analysis of Bauxite Residue and Graphite Reinforced Aluminium Hybrid Composites

Fabrication of Al/Al2O3/ SiC/graphene hybrid nanocomposites from Al-dross by powder metallurgy: Sinterability, mechanical and electrical properties

Enhancement of Physical Properties and Corrosion Resistance of Al-Cu-Al2O3/Graphene Nanocomposites by Powder Metallurgy Technique

Corrosion and Tribo-Investigations on Alumina–Graphene-Doped Hybrid Aluminium Composites

Fabrication of Cu/Al/Cu Laminated Composites Reinforced with Graphene by Hot Pressing and Evaluation of Their Electrical Conductivity

Mechanical Characterization of Graphene Reinforced Al2024/Albite Hybrid Composites by Powder Metallurgy.

Effect of α-Al and Si Precipitates on Microstructural Evaluation and Corrosion Behavior of Laser Powder Bed Fusion Printed AlSi10Mg Plates in Seawater Environment

Enhancing Mechanical Properties of Graphene/Aluminum Nanocomposites via Microstructure Design Using Molecular Dynamics Simulations

Simultaneously Enhancing Mechanical Properties and Electrical Conductivity of Aluminum by Using Graphene As the Reinforcement