Abstract:The mixing characteristics of cubic particles in a cylinder mixer are analyzed by the SIPHPM simulation in comparison with spherical particles. The assembly of cubic and spherical particles of uniform size is pre-divided into two parts in the axial, circumferential or radial directions respectively. Then they are mixed when the cylinder is rotated at different rotational speeds of Omega(d) = 15-60 rpm. The mixing degree is evaluated by either the Lacey mixing index or the mixing information entropy. A normalized mixing entropy is proposed here to compare the absolute degree of mixing with non-equivalent particle numbers. It is found that, for cubes, the radial mixing efficiency is higher than the circumferential, and the radial and circumferential mixing degrees are both larger than the axial. Compared with spheres, cubic shape may enhance the circumferential mixing whereas reduce the axial mixing levels at high rotating speeds. However, at low rotating speed, cubic shape always reduces the degree of mixing of all the three patterns. Moreover, the axial dispersion characteristics are also explored by the probability density functions and the axial paths. The spatial and temporal diffusion coefficients of concentration and kinetic energies are illustrated and used to explain the axial dispersion mechanism in analogy with diffusion equation. The mean diffusion coefficient of rotational energy is independent of rotating speed, which means the axial diffusion of rotational energy depends on the eccentric feature of cubic particle, i.e. rotational ability. In contrast, it is preferred to regard the axial dispersion mechanism of spheres as convection rather than diffusion. (C) 2018 Elsevier B.V. All rights reserved.

Discussion on the Construction Principle of New Mixing Indices and Application for Cubic Particle Mixing by SIPHPM

SIPHPM simulation and analysis of cubic particle mixing in a tilted tumbler and application of a new mixing index construction principle

A Novel Mixing Index and Its Application in Particle Mixing Behavior Study in Multiple-Spouted Bed

SIPHPM Simulation and Analysis of Cubic Particle Mixing Patterns and Axial Dispersion Mechanisms in a Three-Dimensional Cylinder

Experimental Study on Micromixing Characteristics of Coaxial Mixer in Solid–Liquid Systems

Numerical Simulation of the Efficiency of Mixing in Heterogeneous Microchannels with Patterned Surface Potentials

Numerical study of particle mixing in a tilted three-dimensional tumbler and a new particle-size mixing index

Comparative Study on the Characterization Method of Particle Mixing Index Using DEM Method

Mixing at Cross Joints with Different Pipe Sizes in Water Distribution Systems

Inertial Particle Focusing and Spacing Control in Microfluidic Devices

Study on the mixing of fluid in curved microchannels with heterogeneous surface potentials

Progress in Viscous Medium Micromixing Process Study

Numerical Simulation and Analysis of Mixing of Polygonal Particles in 2D Rotating Drums by SIPHPM Method

Numerical Simulation on Fluid Mixing by Effects of Geometry in Staggered Oriented Ridges Micromixers

On the Quantification of Mixing in Microfluidics

Numerical Study on Particle Mixing in a Double-Screw Conical Mixer

Bubble Dynamics and Particle Orientation in a Binary Fluidized Bed Containing Spherocylinders and Spheres

DEM investigation of shear flows of binary mixtures of non-spherical particles

Segregation and mixing of binary mixtures of spherical particles in a bubbling fluidized bed

Particle-Scale Simulation of Solid Mixing Characteristics of Binary Particles in a Bubbling Fluidized Bed

Motion and Orientation of Cylindrical and Cubic Particles in Pipe Flow with High Concentration and High Particle to Pipe Size Ratio