Abstract:The granular motion of binary-size mixture in a three-dimensional rotating drum operating in the rolling regime is numerically tracked via the discrete element method (DEM), with a focus on the axial dispersion behavior of the different particle types in response to the inherent size-segregation. Accordingly, the evolution with time, the frequency distribution and the space-time profiles of the axial dispersion coefficients are evaluated. The results demonstrate that (i) the fast radial segregation gives rise to the sharp increase and decrease of the axial dispersion coefficients of respectively the large and small particles in both the active and passive regions; (ii) the axial dispersion coefficients in the active region is an order-of-magnitude higher than that in the passive region; (iii) after the radial segregation, the frequency distributions of the axial dispersion coefficients of the large particles, the small particles and all the particles are normal distributions; (iv) the greatest axial dispersion coefficients of both particle types are at the upper part of the active region near the bed surface; (v) increasing the rotating speed and particle diameter ratio clearly enhances the axial dispersion intenstity in the active and passive regions; and (vi) axial segregation results in the greatest axial dispersion near the end walls, while most of the rest of the drum exhibit equally low axial dispersion. The results obtained here contribute towards understanding the dynamical response of the axial dispersion of different particle types to the inevitable radial and axial segregation phenomena, and are expected to be valuable for improving operations and advancing theoretical models of such granular systems with constituents of different sizes.

Numerical Simulation and Analysis of Mixing of Polygonal Particles in 2D Rotating Drums by SIPHPM Method

Numerical Simulation of Tetrahedral Particle Mixing and Motion in Rotating Drums

Effects of Periodic and Non‐periodic Chaotic Mixing on Morphology Development of Immiscible Polymer Blends

SIPHPM Simulation and Analysis of Cubic Particle Mixing Patterns and Axial Dispersion Mechanisms in a Three-Dimensional Cylinder

Studying on the Upper Limit of the Coarse-Grained DEM Model for Simulating Mixing Processes in a Rolling Drum with Complex Wall Boundary

Numerical Study of the Motion Behaviour of Three-Dimensional Cubic Particle in a Thin Drum

2D DEM Simulation of Particle Mixing in Rotating Drum: A Parametric Study

Investigating the Flow of Rod-Like Particles in a Horizontal Rotating Drum Using DEM Simulation

Numerical Simulation of Radial Segregation Patterns of Binary Granular Systems in A Rotating Horizontal Drum

Numerical and Experimental Study of Radial Segregation of Bi-Disperse Particles in a Quasi-Two-dimensional Horizontal Rotating Drum

Modelling of the Flow of Ellipsoidal Particles in a Horizontal Rotating Drum Based on DEM Simulation

Numerical Simulation and Analysis of Particle Mixing and Conduction in Wavy Drums

Effect of Particle Shapes on Diffusion and Mixing in a Cylindrical Mixer with Rotating Paddles

DEM investigation of the axial dispersion behavior of a binary mixture in the rotating drum

SIPHPM simulation and analysis of cubic particle mixing in a tilted tumbler and application of a new mixing index construction principle

Geometrically Exact Discrete-Element-method (DEM) Simulation on the Flow and Mixing of Sphero-Cylinders in Horizontal Drums

Numerical Study of Mixing of Binary-Sized Particles in Rotating Tumblers on the Effects of End-Walls and Size Ratios

Numerical Study on Particle Mixing in a Double-Screw Conical Mixer

DEM simulation and analysis of particle mixing and heat conduction in a rotating drum

Simulation of Mixing Process for Size-Type Binary Wet Particulate Systems in A Rotating Horizontal Drum by Discrete Element Method

Influence of rotating velocity on particle mixing characteristics in a three-dimensional tumbler