Release and Transformation of Alkali Metals During Co-Combustion of Coal and Sulfur-Rich Wheat Straw
Rundong Li,Xingping Kai,Tianhua Yang,Yang Sun,Yeguang He,Shengqiang Shen
DOI: https://doi.org/10.1016/j.enconman.2014.02.059
IF: 10.4
2014-01-01
Energy Conversion and Management
Abstract:Co-combustion of coal and biomass is a low-cost, large-scale, and efficient way to utilize biomass energy, which has a wide range of potential applications. However, biomass, especially herbaceous fuels, contains high levels of volatile K, Na, and Cl, the use of which may result in ash-related operational problems, such as corrosion, fouling, and slagging during thermal utilization. The aim of this study is to investigate the effects of wheat straw and temperature on the release and transformation of alkali metal species during co-combustion of coal and S-rich wheat straw. Results indicate that the amounts of K and Na released during co-combustion could be reduced by the effects of Fe, Ti, S, Si, and Al from blended fuels. At lower wheat straw shares, the release of K decreased due to reactions of KCl with Fe species, and Ti species, forming K2Fe2O4 and K2TiO3. At high wheat straw shares, the release of K could be mainly captured in the form of K2SO4; small amounts of KAlSiO4 were also observed in the bottom ash. When the wheat straw share was 80 wt.%, increasing temperatures enhanced the release of KCl(g) and NaCl(g) at 600-800 degrees C. By contrast, in the range of 800-1000 degrees C, the amounts of these gases released exhibited no apparent association with temperature. Compared with the release of K, fuel K was mainly retained in the bottom ash. The K2SO4 content in the bottom ash decreased with increasing temperature in the range of 600-1000 degrees C, whereas the fraction of K in the form of KAlSiO4 and KAlSiO6 increased with increasing temperature, especially at temperatures between 800 and 1000 degrees C. (C) 2014 Elsevier Ltd. All rights reserved.