Abstract:Interparticle forces exert a critical effect on particle fluidization characteristics in gas-solid fluidized beds. Glass and steel fluidized beds are specially designed to study the effects of liquid and high temperature, two key parameters in the condensed-mode operation of industrial polymerization reactors, on particle fluidization characteristics mainly from two aspects: interparticle forces and minimum fluidization velocity. Variations in interparticle forces are reflected in the peak values and gas velocity ranges of the "hump" in the Delta P-u(g) curve. This is because an increase in liquid content or bed temperature enhances the compaction of fixed-bed particles and makes complete fluidization of the particles difficult to achieve. Moreover, the increase of the minimum fluidization velocity can be ascribed to the delay of particle fluidization caused by the growth of interparticle cohesive forces due to the increase in liquid content and temperature. Three types of methods, namely, pressure drop measurements, accelerometry, and visual observation, are compared, and accelerometry was found to be superior to the pressure drop method for measuring u(m)f in a liquid-containing fluidized-bed reactor. In addition, the reversibility of agglomeration and its implications for industrial operation are discussed. This work aims at further understanding wet and high-temperature gas-solid fluidized beds, especially the condensed-mode operation of polyethylene fluidized-bed reactors.

Heat Transfer Characteristics in the Dense Phase Region of a Pressurized Fluidized Bed

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Heat Transfer of Batch Simulating Continuous Fluidized Bed with Wet Particles

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

Hydrodynamics and Heat Transfer in a Fluidized Bed with Liquid Spray: Particle Color-Change Based Measurement and Modelling

Dynamic and Steady-State Characterization of the Liquid Spray Zone in an Externally Heated Gas–Solid Fluidized Bed

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Bed-to-tube Heat Transfer Characteristics with an Immersed Horizontal Tube in the Pressurized Fluidized Bed at High Temperature

The Gas Interchange Between Bubble and Emulsion Phases in a Pressurized Fluidized Bed by Computational Fluid Dynamics Simulations

Heat Transfer in a Pressurized Circulating Fluidized Bed

An Investigation on the Heat Transfer Model for Immersed Horizontal Tube Bundles in a Pressurized Fluidized Bed

Heat Transfer Characteristics of Horizontal Tubes in the Dilute Phase of the Pressurized Fluidized Bed

Effects of Interparticle Forces on Fluidization Characteristics in Liquid-Containing and High-Temperature Fluidized Beds

Characterization of Pressure Fluctuations from a Gas–solid Fluidized Bed by Structure Density Function Analysis

Effect of elevated pressure on gas-solid flow characteristics in a circulating fluidized bed

Thermal Radiation Characteristics in Dilute Phase Region of the Oxy-Fuel Combustion Pressurized Fluidized Bed

Heat transfer characteristics for horizontal immersed tube in internal circulating fluidized bed

Heat Transfer in a Pulsating Fluidized Bed

Computational study of heat transfer in bubbling fluidized beds with geldart a powder

Computational study of heat transfer in a bubbling fluidized bed with a horizontal tube