Abstract:The effective thermal conductivity (ETC) has important guiding significance for the exploitation of natural gas hydrate. The dependence of the ETC of hydrate-bearing sediments in gas-rich and water-rich systems on temperature, hydrate saturation, porosity, bentonite content and intrinsic thermal conductivity of sediments was systematically measured using a probe-type thermal conductivity measurement equipment in this study. The experimental results indicate that the relationship between the ETC of hydrate-bearing sediments and hydrate saturation shows different trends in gas-rich and water-rich systems, respectively. The ETC in gas-rich system increases with increasing hydrate saturation, while the ETC decreases with increasing hydrate saturation in water-rich system. The ETC of hydrate-bearing sediments significantly decreases with increasing porosity in gas-rich and water-rich systems. The sediment particles with higher intrinsic thermal conductivity contributes to a higher ETC of hydrate-bearing sediment. The formation of hydrate can reduce the ETC of quartz sand sediment in gas-rich system, but increase the ETC of gas-rich sediment system containing bentonite. In addition, the existing models for predicting the ETC of soil system considering the contact mode between particles and gas/water distribution pattern were used to predict the ETC of hydrate-bearing sediments. The model used for calculating the ETC of soil system has shown good predictive performance in gas-rich and water-rich hydrate-bearing sediment systems. The results contribute to a profound understanding of the impacts of different factors on the ETC of hydrate reservoirs during hydrate exploitation, thereby providing insight to the heat transfer capacity of hydrate-bearing sediment for improving hydrate exploitation efficiency.

Prediction of the effective thermal conductivity of an adsorption bed packed with 5A zeolite particles under working conditions

Mathematical Modelling of Expanded Bed Adsorption – a Perspective on in Silico Process Design

Impact of long-range electrostatic and dispersive interactions on theoretical predictions of adsorption and catalysis in zeolites

Experimental study of effective thermal conductivity of methane hydrate-bearing sediments in gas-rich and water-rich systems

Simulation of a zeolite thermochemical heat storage reactor: Impact assessment of isotherm model selection

Experimental Adsorption Equilibrium Study and Comparison of Zeolite with Water and Ethanol for Cooling Systems

Impedance Characterization of Elevated Temperature Carbon Dioxide Adsorption Process on Potassium-Modified Hydrotalcite

Cation Dependence of Gas Adsorption in Clinoptilolite and RHO Zeolites Using Monte Carlo Simulation: A Linear Model

Theoretical analysis of effective thermal conductivity for clayey hydrate-bearing sediments during hydrate dissociation and reformation processes

Experimental and modeling study of volatile organic compounds adsorption over zeolitic monolith adsorbent

Thermal conductivity modeling of monodispersed microspheres using discrete element method

The dynamic adsorption of Xe on a fixed bed adsorber at 77 K

An improved prediction model for the effective thermal conductivity of compact pebble bed reactors

Molecular Simulation of Adsorption of CO2 from a Combustion Exhaust Mixture of Zeolites with Different Topological Structures

Molecular Simulation of Adsorption Separation of CO2 from Combustion Exhaust Mixture of Commercial Zeolites

Elevated temperature hydrogen/carbon dioxide separation process simulation by integrating elementary reaction model of hydrotalcite adsorbent

Impact of adsorption on thermal conductivity dynamics of adsorbate and adsorbent: Molecular dynamics study of methane and Cu-BTC

A complete transport validated model on a zeolite membrane for carbon dioxide permeance and capture

Effect of Nano-Sized Cavities in SAPO-34 Zeolite on Thermodynamics of Adsorbed Gas Mixtures.

Thermal conductivity prediction of nanoparticle packed beds by using modified Johnson-Kendall-Roberts model

Static and Dynamic Simulation of Single and Binary Component Adsorption of CO2 and CH4 on Fixed Bed Using Molecular Sieve of Zeolite 4A