Abstract:A complementary electrolyte system with 0.8 M lithium bis(fluorosulfonylimide) (LiFSI) salt and 2 wt % lithium perchlorate (LiClO4) additive in fluoroethylene carbonate (FEC)/ethyl methyl carbonate (EMC) solution enables not only stable cycling of lithium metal batteries (LMBs) with practical loading (<30 μm lithium anode, cathode loading > 4 mAh/cm2) but also outstanding degradation stability toward the end of cycle life when compared to the conventional electrolyte. Although the use of LiFSI salt can increase the electrolyte conductivity and lengthen the cycle life of LMBs, the aged lithium anode morphology formed by the sacrificial decomposition of LiFSI is highly porous, leading to an abrupt cell capacity drop toward the end of cycling. Moreover, the inability to stop aluminum corrosion by the LiFSI-based electrolyte also causes cracking of the cathode tab during prolonged cycling. It is observed that a highly porous aged lithium consumed electrolyte at a higher rate, leading to the dry-out of electrolyte solvents. On the contrary, dense aged lithium anode morphology increased the localized current applied on the lithium, causing the formation of lithium dendrite. Thus, porosity control is the key to enhance battery performance. In this complementary system, LiClO4 was introduced as an advanced additive to not only improve the capacity retention rate but also mitigate the abrupt capacity drop toward the end of cycle life because LiClO4 acted as a pore astringent reducing the porosity of the aged lithium metal anode to the desired level. Moreover, the addition of LiClO4 can also suppress the Al corrosion, allowing stable high-voltage cycling of LMBs. The synergistic effect of combining LiFSI salt and a LiClO4 additive leads to an electrolyte system that can facilitate the application of high-energy LMBs with practical electrode loading.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03017?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03017</a>.Brief statement in a nonsentence format listing the contents of the material; chemical structures and acronyms of carbonates, fluorinated carbonates, and lithium salts; pristine NMC622 cathode; backside (Al current collector) of the harvested electrode aged in the LiFSI/FEC/EMC electrolyte; Capacity retention and electrochemical impedance spectra of Li/NMC622 cells with different electrolytes; XPS spectra of C 1s, F 1s, S 2p, and Cl 2p for the pristine and harvested lithium anodes after formation under different electrolytes; Tafel plots obtained from the CV test in the Li/Cu cell with various FEC/EMC electrolytes; and SEM image of the Al working electrode before and after potentiostatic hold under different electrolytes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03017/suppl_file/am1c03017_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Effects of 3-Fluoroanisol As an Electrolyte Additive on Enhancing the Overcharge Endurance and Thermal Stability of Lithium-Ion Batteries

Application of Anisole, 2-Bromoanisole and 3-Bromoanisole As Overcharge Protection Additives in Lithium-Ion Batteries

The Synergistic Effect of Lithium Bis(fluorosulfonyl)imide and Lithium Nitrate for High-Performance Lithium Metal Anode

Anion-Tuned Fluorinated Solvation Sheath Enables Stable Lithium Metal Batteries

Promotion of Li + desolvation and efficient cathode interphase formation by 4-aminobenzoic multifunctional electrolyte additive

Fluorinated cyclic siloxane additives for high energy density Li-ion batteries with high nickel cathodes and silicon–carbon anodes

Practical 4.4 V Li||NCM811 batteries enabled by a thermal stable and HF free carbonate-based electrolyte

Electrolyte Additives for Improving the High-Temperature Storage Performance of Li-Ion Battery NCM523∥Graphite with Overcharge Protection.

Remodeling Highly Fluorinated Electrolyte via Shielding Agent Regulation toward Practical Lithium Metal Batteries

Enhancing the Intrinsic Safety of Nickel-Rich Lithium-Ion Batteries by an Ethylene Carbonate-Free Electrolyte with Ethoxy(pentafluoro) Cyclotriphosphazene Additive

4,5-Difluoro-1,3-dioxolan-2-one As a Film-Forming Additive Improves the Cycling and Thermal Stability of SiO/C Anode Li-ion Batteries

4-Bromoanisole as a New Overcharge Protection Additive of Lithium-ion Batteries

Complementary Electrolyte Design for Li Metal Batteries in Electric Vehicle Applications

FEC Additive for Improved SEI Film and Electrochemical Performance of the Lithium Primary Battery

A Nonflammable Diethyl Ethylphosphonate-Based Electrolyte Improved by Synergistic Effect of Lithium Difluoro(Oxalato)Borate and Fluoroethylene Carbonate

3-(Trifluoromethyl)benzoylacetonitrile: A multi-functional safe electrolyte additive for LiNi0.8Co0.1Mn0.1O2 cathode of high voltage lithium-ion battery

The High-Fluorinated Bi-Molecular Combination Enables High-Energy Lithium Batteries under Challenging Environment

Electrolyte design combining fluoro- with cyano-substitution solvents for anode-free Li metal batteries

Nonflammable electrolyte with low exothermic design for safer lithium-based batteries

Optimizing Electrode/Electrolyte Interphases and Li‐Ion Flux/Solvation for Lithium‐Metal Batteries with Qua‐Functional Heptafluorobutyric Anhydride