Abstract:The C-band deflecting cavity designed last year is finished. In this paper, the RF measurement of the cavity is introduced. After tuning, it works well at 5.712GHz with a coupling factor degree around 1.05. And we measured the electromagnetic field with bead-pull method. The flatness of the magnetic field is around 0.9, which is not ideal but meet the requirements of the bunch length measurement. And we propose a method of tuning to make sure both frequency and field flatness. INTRODUCTION The C-band deflecting cavity designed last year for the measurement of ultra-short electron beams is finished. It’s a standing wave RF deflecting structure consisting of 3 cells. This cavity is designed to operate at a frequency of 5.712GHz. In the second section of the paper, the design of the deflector is briefly introduced. RF measurement results are shown in the third part. And a new tuning method is discussed in the fourth part. RF DEFLECTOR DESIGN In our case, we choose a 3-cell SW structure to meet the required transverse deflecting voltage Vdef=1MV. The working mode is TM110 mode and π-mode. The 3D-model draw by CST is shown in Figure 1. Figure 1: 3D-design of the deflector. The main part of the model is composed of several cylinders. The radii of the cells are determined by both the frequency and magnet field flatness. And the length of central cell is determined by the working mode while the length of the end cells is determined by the results of particle dynamics[1]. In order to make sure the polarization direction not changed while two cell coupled, two end cells are slotted on the edges which are perpendicular to the direction we put the coupler. According to the discussion above, the dimensions of the cavity are shown in figure 2 and table 2. Figure 2: 3D-design of the deflector. Table 1: Dimensions of the RF Cavity Dimensions Value(mm) rm 30.85 dm 21.49 re 30.61 de 10.93 t 4.76 rb 8 rslot (not shown in figure 2) 3.5 According to the dimensions, it’s easy to get the cavity parameters such as the transverse shunt impedance. And table 3 shows the main parameters of the RF cavity. With 1 MW input power, the deflecting voltage can be 1.19 MV. Table 3: Cavity Parameters Parameters Value Q0 9003 RT/Q(MΩ) 156 RT(MΩ) 1.42 P(MW) 1 Vdef(MV) 1.19 ___________________________________________ *Work supported by NSFC 11375098 and 11327902 #jxp14@mails.tsinghua.edu.cn MOPMR060 Proceedings of IPAC2016, Busan, Korea ISBN 978-3-95450-147-2 386 C op yr ig ht © 20 16 C C -B Y3. 0 an d by th e re sp ec tiv e au th or s 06 Beam Instrumentation, Controls, Feedback and Operational Aspects T03 Beam Diagnostics and Instrumentation In table 3, we are more concerned about RT/Q which has little change after machining. And we can evaluate the real deflecting voltage by measuring the quality factor Q0 by equation 1

Measurement of Axial Field Distribution in a W-band Extended Interaction Resonant Cavity Based on Perturbation Technique

Characterization Of Near-Field Coupling Effects From Complicated Three-Dimensional Structures In Rectangular Cavities Using Fast Integral Equation Method

Research of Coupling Coefficient Extraction of a Cavity Resonator

Measurement of microwave electromagnetic parameters of nanostructural magnetic films by using cavity perturbation

Demonstration of the Electronic Cutoff Field in Millimeter-Wave Extended Interaction Oscillators

Characteristics of Electric Field Distribution in a G-band Overmoded Extended Interaction Oscillator

The nonresonant perturbation theory based field measurement and tuning of a linac accelerating structure

R/Q Measurements of Multi-Gap Metamaterial Extended Interaction Resonant Cavity Using Perturbation Method

Measurement of Beam Steering and RF Defocusing Effect for a Quarter-Wave Resonator

Broadband Measurements of the Surface Impedance in Ferromagnetic Wires As a Boundary Condition for Scattering Problems

Design and Simulation of a W-band Extended Interaction Oscillator with Coupled Cavity

Non-contact measurement of complex permittivity based on coupled magnetic and electric resonances

A Wideband EzEx Field Probe Integrated with a Strip Line Magic-T

C-Band Deflecting Cavity for Bunch Length Measurement of 2.5 MeV Electron Beam

Simulation of a 120ghz Rectangular Coupled Cavity EIO in Sub-Terahertz Waves

Enhanced Microwave Electric Field Measurement With Cavity-Assisted Rydberg Electromagnetically Induced Transparency

Field Distribution Measurement System Based on LabVIEW and Perturbation Method: Design and Performance

Design of a tunable resonant electric field-enhanced structure

Study of a Rectangular Coupled Cavity Extended Interaction Oscillator in Sub-Terahertz Waves

Measurement of Dispersion Properties of Active and Surrounding Regions in BAW Resonator

Field Distortion and Optimization of a Vapor Cell in Rydberg Atom-Based Radio-Frequency Electric Field Measurement